That sounds right. The line that connects to the PCV valve is the one you want, no matter what.
Mine was like a rock. It went from the valve to a Tee on the driver side behind the upper.
If you put your new line on the PCV valve, it should fit tight - that is what matters. 3/8" is what I used.
Good luck.
Mine was like a rock. It went from the valve to a Tee on the driver side behind the upper.
If you put your new line on the PCV valve, it should fit tight - that is what matters. 3/8" is what I used.
Good luck.
You are telling me. I thought the Tee was on the driver side (just right of center), but I must be wrong. I did access it from the driver side.
I have 18" forearms - I look like a fool trying to get those hoses installed.
I should mention that in Andy's oil separator thread, he posted a lot of pics and might have some thaat help.
Good luck.
I have 18" forearms - I look like a fool trying to get those hoses installed.
I should mention that in Andy's oil separator thread, he posted a lot of pics and might have some thaat help.
Good luck.
Similar threads
What's it Worth?
1997 Cobra, a ton of mods and restoration
Progress Thread
mnky99 2001 V6 evap core, ac compressor, heater core replacement