need advice A.S.A.P

[Roland69]

I was just offered a professional Products upper and lower intake with BBK spacer. He said they are exactly the same as edlebrock performer rpm....almost new with 500 miles on them for $380 CDN. Are theese any good and will I gain much with them.. Should I take this deal. I'll post pics in a sec

 

[Roland69]

or maby it was 1500 miles on them

 

[Roland69]

View attachment 451259

View attachment 451261

View attachment 451263

View attachment 451265

 

[1SLO306]

get it and clean it. its will look sweet on that black gt

 

[Roland69]

yea but will it work good (worth 380 cdn)

 

[Roland69]

and would it be better with the spacer or not

 

[88 Fox GT]

So according to google thats about $335 USD.

Looks like a new Edelbrock Performer is $500.

Since it's the same thing...sounds like a good deal to me.

 

[donsbad68]

You can get those new for $385 USD, I've ran one and it was ok. Trick Flow was alot better but if your running stock you will like it.

 

[DeVus1]

Are you going to stay with the stock E7 heads or do you plan on upgrading? If you are going with different heads, then I would save up for the Trick Flow Street heat intake.

 

[DMAN302]

I did like the typhoon on my stock motor..some low end loss, some upper gained...heads still the bottleneck. I run that same intake untouched on my present combo and made simular numbers to the TW or AFR guys with the FTI/EDDY RPM combinations. I would grab it, clean it and install it witthout the spacer (hood clearance issue..and the fact the spacer offers no real assistance.)

 

[Strype]

Get it!

 

[352Ford2]

spacer should help drop the RPM range a little, if I rember correcty the only diff between the performer and RPM are runner length, which you effectivly increase with a spacer

 

[Roland69]

I do plan on some aluminum heads some time.

 

[Roland69]

how much power should I expect to gain if I get this

 

[DMAN302]

10-15...it's more about being an addition that will assist you later with your bigger add ons.

 

[Roland69]

or should I just wait and get a TFS kit all at once

 

[DeVus1]

or should I just wait and get a TFS kit all at once

Thats my advice. TFS kit has shown wonderful gains on the dyno.

 

[I_AM_CANADIAN]

Thats my advice. TFS kit has shown wonderful gains on the dyno.

+1