NEED ADVICE

I am going to get the .275 blower pulley, but what size crank (blower ) pulley should I get to get atleast 15 lbs of boost. I know that the .275 pulley advertised 14-15 lbs on most apps, but my car has H/C/I setup so I know with that I prolly wouldnt see but maybe 12. I also need to know what my crank acces. drive pulley size is. So I need to know the crank pulley size ( for blower and acc.) and I guess I would need a smaller SC belt too. I know they make kits but I dont know the sizes that I need.
 
I think if you change both pulleys at the same time you would need to go smaller on the charger and larger on the crank. Why dont you just change the one charger 1st and see what happens?
 
2.75 is a pretty small pulley and it should make 15psi just with it. but if not ASP makes 1 piece alum pullies with the crank drive and blower drive all in one pulley. they are liek 150, you can get a 7 inch blower drive or 8.
 
i dont know honestly the best and most accurate way to do it. is put the pulley on and wrap a string around the crank and blower pulley and measure the string. dont forget to factor in the tensioner also.

your local parts store should carry belts small enough, at least my local store did.