• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Need help choosing cylinder heads

  • Thread starter Thread starter ColdAudio
  • Start date Start date May 5, 2006
C

ColdAudio

New Member
Jan 9, 2006
31
0
0
May 5, 2006
#1
  • May 5, 2006
  • #1
im looking to pick up some of the best possible ones to use on a stock motor without having to cut the pistons... maybe heads that can be upgraded to bigger valves at a later time should i decide to stroke my motor i may as well go bigger

i was considering afr 185's but they are a bit pricey and i can get some killer discounts on other brands unfortunately not afr... any recommendations on similar heads or ones that would perform closely? i was looking at victor jr's but those will not clear stock pistons, the rpm heads will but only flow 170cc... any help is greatly appreciated. i was also considering a victor jr intake manifold for a bit more flow?

my current mods are just a ported cobra intake manifold and a B cam... should i also be looking at getting a bigger cam or different cam? also, what rockers should i be looking at getting? thanks a bunch
 

fidstang

New Member
Jul 19, 2005
307
0
0
South Lansing
May 5, 2006
#2
  • May 5, 2006
  • #2
With the ported cobra intake you might as well find some gt40iron or gt40p heads for cheap. Then have them hand ported for street use. Which is just a port match, blending of the bowls and smoothing of imperfections. Then if you have a little extra money get them cleaned, checked and a valve job done. If you want to get rid of the ported cobra but keep your bottom stock, then get the BBK SSI intake manifold. It was just tested box stock and beat the cobra ported in MM&FF. Then get some aluminum heads like Holley or Edelbrock. They're cheap and respond well to basic porting. Also, keep on eye on ebay, sometimes they have some good ported heads pop up from some known vendors. Some say it's all about combination of parts. I say it's all about the amount of money you can spend!
 
M

mackey

Active Member
Jan 25, 2003
1,284
1
38
Beverly, Massachusetts
May 5, 2006
#3
  • May 5, 2006
  • #3
Trickflow TW Already have the 2.02 valves.
 
You must log in or register to reply here.

Similar threads

K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
522
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
D
N/A build on fresh stock 302
  • djcarrot
  • Oct 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
457
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 19, 2026
AeroCoupe
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
238
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
1
Crank no start on a turbo and cammed pushrod 5.0
  • 1630stri
  • Sep 2, 2026
  • Digital Self-tuning Forum
Replies
2
Views
214
Digital Self-tuning Forum Sep 16, 2026
Qtrhrse23
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?