• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

need help fast!!!

  • Thread starter Thread starter jgfiveoh
  • Start date Start date Sep 28, 2006

jgfiveoh

New Member
May 8, 2006
102
0
0
Topeka, KS
Sep 28, 2006
#1
  • Sep 28, 2006
  • #1
before the rtv dries, do i go throught the lower intake sequence one time only (while torqing to 24 ft lbs) or do i go through it until all the bolts are torqued evenly?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 28, 2006
#2
  • Sep 28, 2006
  • #2
It's probably a little late now, but do at least 2 passes.

The picture below shows the sequence:

Diagram courtesy of Tmoss & Stang&2birds


See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 88-95 wiring http://www.veryuseful.com/mustang/tech/engine/

http://www.veryuseful.com/mustang/tech/engine/images/IgnitionSwitchWiring.gif

http://www.veryuseful.com/mustang/tech/engine/images/fuel-alt-links-ign-ac.gif

http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif
 

bullitstang1313

Member
Jan 21, 2003
713
0
16
Indianapolis / Columbus, Indiana
Sep 28, 2006
#3
  • Sep 28, 2006
  • #3
You might also want to go through and re-torque the lower after running the engine to operating temperature. This is a somewhat common problem on these since the intake is aluminum.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Sep 28, 2006
#4
  • Sep 28, 2006
  • #4
I retorqued mine a total of 3 or 4 times till there wasn't any variances in all the bolts. I wanted to make sure that the pressure was even because I didn't want a bad seal and create a nice oil/water milkshake.
Kevin
 

jgfiveoh

New Member
May 8, 2006
102
0
0
Topeka, KS
Sep 30, 2006
#5
  • Sep 30, 2006
  • #5
thanks for the help guys, i did use that torque sequence JR, but i just ended up going throught the sequence about 15-20 times (slight exaggeration) until none of the bolts moved anymore. i've done the lower about five times total now by the book but part of me thought there was a "secret trick" i was missing at the time. since then i've taken my meds thanks for all the input though!:SNSign:
 

Red88 RICK

Member
Sep 2, 2006
101
0
17
Connecticut
Mar 21, 2008
#6
  • Mar 21, 2008
  • #6
how do you retorque all the bolts some are under the upper do you have to take that off? i didnt do this during my rebuild and now im have cooling issues
 
You must log in or register to reply here.

Similar threads

9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
518
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
398
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
Cooling Jacket Pitting Idea's?
  • BoostedRed89gt
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
358
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 17, 2026
Mustang5L5
T
Need help with 302 swap
  • thxmxrgx
  • Sep 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
279
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 24, 2026
thxmxrgx
T
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?