• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

need help from guys with electric fan onwers

  • Thread starter Thread starter russ1979
  • Start date Start date Jan 5, 2010

russ1979

Member
Oct 6, 2006
152
0
16
albuquerque, new mexico
Jan 5, 2010
#1
  • Jan 5, 2010
  • #1
i need to replace my radiator soon (it's leaking) but i was thinking of taking off the fan and shroud to put on a electric fan as long as i'm digging in to that area. everyone says it's a good mod. however, my only experience was 10 years ago, when a buddy put a flex-a-light on his 88 5.0 and soon after it started overheating a lot. from what i under stand a lot of it has to do with what kit you get. some are trash and some are not.

help me out guys what worked for you and what would you recommended to a freand.
thanks
 

faststang90

10 Year Member
Nov 5, 2007
522
16
49
baytown texas
Jan 5, 2010
#2
  • Jan 5, 2010
  • #2
look here at this
http://www.stangnet.com/mustang-forums/804047-junkyard-electric-fans.html
 
S

stangfanatic

New Member
Oct 4, 2009
107
1
0
Martinez, Ga
Jan 5, 2010
#3
  • Jan 5, 2010
  • #3
I know its more than most want to spend, but I put in the mishimoto dual fan kit. It comes with an aluminium shroud and two 12" electric fans pulling 933 CFM @ 8A each. You will need an electric fan control unless you just want to rig up a switch or something to turn them off and on manually. I used a Derale DER-16749 which has a temp sensor and is adjustable from 150 to 240. I like it and have not had any overheating problems with my car. I have posted links below to the two items I mentioned.

Mishimoto 5.0 Dual Fan Kit

Adjustable Fan Controller
 

Tanus

New Member
Dec 11, 2009
847
1
0
A to the Z
Jan 5, 2010
#4
  • Jan 5, 2010
  • #4
black magic, comes with mounting brackets, no need for the janky zip-tie things that go through the fins
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Jan 5, 2010
#5
  • Jan 5, 2010
  • #5
Viper fan with DC controler works great. Fills the griffin 31x19 perfectly.
Kevin
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 5, 2010
#6
  • Jan 5, 2010
  • #6
Since you're in the desert, you're going to want to use something on the robust side. A combo like Kevin's is outstanding, for example.

If using JY fans, you could try a Mark VIII or 3.8L Taurus fan.
 
You must log in or register to reply here.

Similar threads

S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Engine Which cooling part first?
  • Dontknowchit
  • May 8, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech May 15, 2025
90trunk
Exhaust April is the worst month
  • Enzio
  • Mar 4, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
210
1974 - 1978 Mustang II Talk & Tech Mar 7, 2026
LILCBRA
L
Car has been overheating. Not sure what is causing it. Any help would be appreciated.
  • Luckysgirl
  • Jun 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
123
1996 - 2004 SN95 Mustang -General/Talk- Jun 2, 2026
Luckysgirl
L
R
Engine Fox body doesn’t run hot until I start driving
  • Rose5oh
  • Mar 17, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
1K
Fox 5.0 Mustang Tech Jun 7, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?