Need help Identifing a Cam..

A67StangMaster

New Member

May 4, 2005

401

0

0

San Jose CA

Sep 30, 2006

#1

• Sep 30, 2006

• #1

well I bought this 351c block from a guy which knew nothing about it... The heads were valve ported and the springs were double springs which got me thinking mabey the cam was swaped too? well I need help finding out what the specs on this cam are...

this is what came off the cam from top to bottom.

TY79E
ISKENDERIAN
9P O8
302 351C
431 HYD

I understand the 351c and the hydralic cam but what is the other stuff?

Thanks.

 

B

brin0357

New Member

Jan 26, 2006

169

0

0

Oct 1, 2006

#2

• Oct 1, 2006

• #2

Measure it for lift.

 

A67StangMaster

New Member

May 4, 2005

401

0

0

San Jose CA

Oct 1, 2006

#3

• Oct 1, 2006

• #3

Dont you need a special tool for that?
well i guess since i could not find any info online thought maybe you guys might its all good hope fully one day I will take it on to get it checked out

 

B

brin0357

New Member

Jan 26, 2006

169

0

0

Oct 1, 2006

#4

• Oct 1, 2006

• #4

Well to do it properly you need a machinists v block and a dial indicator, but you just measure the largest part of the lobe (highest lift) - the base circle (smallest part) times your rocker ratio and that should get you close. A verneir caliper works to give you ballpark numbers.

 

D

D.Hearne

New Member

Sep 29, 2000

11,730

6

0

south louisiana

Oct 1, 2006

#5

• Oct 1, 2006

• #5

Call Iskenderian andask em. They're still around. "Isky" cams

 

Max Power

Active Member

Jul 31, 2003

1,774

1

36

St Paul

Oct 1, 2006

#6

• Oct 1, 2006

• #6

www.iskycams.com/