Need help with broken T-5 transmission and driveshaft

if the only thing it hurt was the tailshaft housing, yes if you can get one its fairly easy to change out

put transmision in neutral, pull shifter, pound out roll pin, remove offset lever(thing the shifter ball sits int, and you just pounded roll pin out of), remove bolts holding extension housing to main housing and pull it off

dont know if its possible in car so youll most likley have to pull the tranny

goodluck

See http://www.ttcautomotive.com/English/onlineorder/product.asp to download a FREE service manual for T5 or Tremec 3550
You will need the Adobe Acrobat viewer which is also a free download – http://www.adobe.com/products/acrobat/readstep2.html

See http://www.ddperformance.com/index2.htm for parts
or
http://www.hanlonmotorsports.com/

A T5 rebuild kit with syncros, bearings and other small parts costs about $160. It does not include any gears or shafts.

There is a video on how to rebuild your T5 or Tremec. If http://www.hanlonmotorsports.com/ are out of stock see http://cartapes.com. It costs less than $20, and is worth every penny of it.

I did a Tremec 3550 rebuild, and it wasn't that difficult. The video was an immense help, and I would recommend viewing it. At $20, it will give you an opportunity to look and decide for yourself if you think that it is something you want to try to do.

If you change the tailshaft, It could affect endplay slightly. Just keep that in mind if you do replace it.

AC