Need help with Problem Code

Silvergto2 · Mar 29, 2006

I was messing around with the diagnostic tool on our gage cluster and got the code DTC 5284 "Oil Pressure Switch Failure" WTF is this? How can I fix it? What kind of symptoms will it cause. I am having some slight hesitation issues and my car will idle a little funny. It idles between 630 rpm to 780 rpm. Could this be causing any of my problems?

Silvergto2 · Mar 29, 2006

Nevermind....gotta love that search feature....but it still makes me wonder about my hesitation problem...

Mike97gt · Mar 29, 2006

I really wish that the bullit site would remove the part about checking codes using the cluster..

The cluster is not a scan tool. The codes you see on there are for the ( HEC) hybrid elctronic cluster module and not for any other modules.

PCM codes will not appear there. plus the codes you are pulling is misleading. These are hard fault codes for the HEC module and for the most part are set when setting the cluster into diag mode and not follwing the steps in the book for the on board tests.

Need help with Problem Code

Silvergto2

Member

Silvergto2

Member

Mike97gt

it doe snot

Similar threads

Need help with Problem Code

Silvergto2

Member

Silvergto2

Member

Mike97gt

it doe snot

Similar threads

Privacy & Transparency

Privacy & Transparency