Need P/S Installation Pics

arbailey

Founding Member

Sep 24, 2002

199

0

16

New Jersey

May 1, 2006

#1

• May 1, 2006

• #1

Hey guys. I just replaced my p/s pump, rack & pinion, and hoses. I'm trying to run the hoses and can't remember how they get routed. I believe they all stay above the sway bar, but how does the pressure line run? I can't figure out how to mount the bracket or how to route the hose. Please help!!!!!!!!

 

Roland69

Sergeant Tangnet

Sep 17, 2005

2,867

2

58

Port Elgin, Ontario

May 1, 2006

#2

• May 1, 2006

• #2

If this helps any
View attachment 472696
View attachment 472697

Hope you don't get a leak or it will look something like



































View attachment 472698

 

arbailey

Founding Member

Sep 24, 2002

199

0

16

New Jersey

May 2, 2006

#3

• May 2, 2006

• #3

Your setup looks a little different than mine, I guess because my car has a/c. I was looking for a pic that shows how the pressure line runs from the pump through the bracket and down to the rack, but I think I have it now. It looks like it should run from up top down through the bracket and down. Thanks.

 

J

jmd2914

Founding Member

Sep 6, 2002

937

0

0

Napa, California

May 2, 2006

#4

• May 2, 2006

• #4

not wanting to jack your thread but im about to do the same project you just completed along with tie rods. how hard was it to do?

 

arbailey

Founding Member

Sep 24, 2002

199

0

16

New Jersey

May 2, 2006

#5

• May 2, 2006

• #5

It really wasn't hard at all. Hardest part was getting the steering shaft to pop loose from the rack, but even that wasn't too bad.