Need Photos Of Ac Condenser Mounts

Mustang5L5 · Jan 8, 2017

inwant to reinstall my ac condenser mounts. Bottoms are in, but I don't have the tops bolted up. Anyone have pics of a pre-90 mustang to show me how the upper condenser mounts are located? Can't figure out which holes they go in

Mustang5L5 · Jan 9, 2017

Anybody? Quick pic of your two upper mounts on a pre airbag car?

Airbag cars might be the same. Not sure

SF Lex · Jan 9, 2017

Mustang5L5 said:
inwant to reinstall my ac condenser mounts. Bottoms are in, but I don't have the tops bolted up. Anyone have pics of a pre-90 mustang to show me how the upper condenser mounts are located? Can't figure out which holes they go in

Yes, this would be cool. If they could post pictures of the step process to adding the entire AC system. Mines was taken off when i purchased my Fox Body, but he gave me some of the parts, told me its all there, i'm sure he lied. Although if there was a video or pictures, i could try to reinstall it. I live where the weather is normally 90 - 100 in heat. I need the AC ! I don't think it would kill the motor power, not sure why he took it off. Although he lives in nice weather and don't need it. Thats only one hour from me, lol ..

95BlueStallion · Jan 10, 2017

Give me a few mins and I will snap some pics of mine. Its an '89 year model. I somehiw missed this thread until now, but am happy to help. Home sick today with nada to do.

95BlueStallion · Jan 10, 2017

Well man, its damn hard to get a pic of them while holding a flood light in my garage. But here is what I was able to get.

Passenger side has two bolts through a flat bracket that wraps around the side of the condenser and attaches to the core support somewhere. I honestly could not see where though. Here is a pic of the two bolts holding the condenser to the bracket. This pic needs to be rotated right. Cant for the life of me figure it out. @Noobz347

On the driver's side upper, it is a tab that slides into a rubber mount on the condenser, and then bolts to the core support. You can see the rubber mount directly below the bolt head in this a pic.

95BlueStallion · Jan 10, 2017

All my wiring is neatly tucked using 28 year old clips, so I didnt want to dick with it, sorry man. If you need something more specific, let me know and I will try to get it for you.

General karthief · Jan 10, 2017

Attempting to post some pics for ya, top mounts in above pics don't show the way the mount is placed, in his defence it's very hard to get a pic because of the wire harness and close proximity of the radiator. At the inside edge of rad mount look for a box opening on the rad side of core support, an ear gos in the box and lines up with the bolt hole, the rubber part of the braket fits under the rad support. The lower pic is a 86 but they are the same as my 89,

General karthief · Jan 10, 2017

Kindel don't take pic worth a hoot. Hope this helps

Mustang5L5 · Jan 10, 2017

Those pics do help!

No wonder why I couldn't find where they went. I was trying to bolt them up from the front side where the hood latch is. Now that I see they bolt up from the radiator side, it all makes sense now! thank you!

General karthief · Jan 10, 2017

Where do I send the bill?

Mustang5L5 · Jan 10, 2017

Just went out to the car and looked in that spot and sure as hell I rethreaded the bolts back into the speed clips that held them.

So not only was I looking in wrong spot, I had the wrong hardware as well!

Thanks guys, that's what I needed and it definitely is a tough spot to take pics in.

General karthief · Jan 10, 2017

Glad to hear it. You got those filler pieces that fit in there to close up the sides?

Mustang5L5 · Jan 10, 2017

Hmm. I'll have o check. Pretty sure I left those

FoxMustangLvr · Jan 10, 2017

I just removed all my AC, I'm sure I'll probably reinstall it someday like you are but there is no way I'm chopping and extending my lines for my KB install. Doesn't get that hot for all that long where I live anyway. Good luck with the install.

Noobz347 · Jan 10, 2017

karthief said:
,

Are you still attending those AA meetings?

Mustang5L5 · Jan 10, 2017

Looks like I don't have those side pieces. Will need to source out

General karthief · Jan 10, 2017

Noobz347 said:
Are you still attending those AA meetings?

Yes but don't tell

RaggedGT · Jan 10, 2017

FoxMustangLvr said:
I just removed all my AC, I'm sure I'll probably reinstall it someday like you are but there is no way I'm chopping and extending my lines for my KB install. Doesn't get that hot for all that long where I live anyway. Good luck with the install.

I thought you sold the KB....

FoxMustangLvr · Jan 11, 2017

RaggedGT said:
I thought you sold the KB....

What KB?

Noobz347 · Jan 11, 2017

FoxMustangLvr said:
What KB?

Damn... where's that address to that bookface thing when I need it?

Need Photos Of Ac Condenser Mounts

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

Advanced Member

My assy trans to myself

My assy trans to myself

My assy trans to myself

wonder how much it would cost to ship you a pair

wonder how much it would cost to ship you a pair

That is…until I whipped out my Bissell

wonder how much it would cost to ship you a pair

That is…until I whipped out my Bissell

wonder how much it would cost to ship you a pair

That is…until I whipped out my Bissell

I love my Pimp

Stangnet Facilities Maint Tech... Er... Janitor

That is…until I whipped out my Bissell

wonder how much it would cost to ship you a pair

Been here over a DECADE and still no CT

I love my Pimp

Stangnet Facilities Maint Tech... Er... Janitor

Similar threads

Privacy & Transparency

Privacy & Transparency