need pics of turbines with 275/50 tires on them

forango · Nov 2, 2009

I have a 1987 5.0 GT with the stock turbine rims...I have been told they will look nice with 275/50 Nitto drag radials out back which would be sweet since I would like to keep the sleeper look going. But I want to make sure I will still be able to lower the car after doing so and really want to see it before I commit.

Can anyone post some pics of 5.0s with this setup out back? or maybe direct me on where I can find pics.

Thanks,

josh

fivespeedsteed · Nov 2, 2009

im pretty positive thats not gonna fit. turbines are narrow.

forango · Nov 2, 2009

I'm sure they will fit...the tire is just gonna be alot fatter than the rim..LOL

I have actually seen pictures of 275/50's on turbine rims, but it was on a cobra kit car not a fox body

cenok is family · Nov 2, 2009

i've fit 275/60's on a turbine before, don't have any pics anymore though. it was a lot of tire though.

1990Coupe · Nov 2, 2009

It def fits. I had a friend running 275 50 BFG's on his turbines. Unfortunately i don't have a pic of it.

68stang351 · Nov 2, 2009

I've had 275/50's on a pair of 10 holes before. If I'm not mistaken the turbines are the same width, if so, then they will fit.

blackened88lx · Nov 2, 2009

They will fit fine. My buddy has been through several sets of 275/50 bfgs on turbines on his gt. I had 275/50 bfgs on my 10 holes which are the same width (7"). Only thing I had to do to fit them was flip the quad shocks and massage the inner fender a tiny bit. I don't have any pics of his turbines but here's what mine looked like on the 10 holes. Can't believe how ****ty my car used to look haha.

Oh, and btw, don't waste your time with Nittos if you're looking for traction.

1987LXragtop · Nov 2, 2009

15x7 rims will take a 275 60 15 tire Ive done that. Too 1983 cheesy looking

forango · Nov 3, 2009

Thanks for the input guys and that photo is badass! LOL....Did you have to flip the shocks at stock ride height, or just to lower the car? and by flip them do you mean you switched right to left, or just front to back?

BTW--it rains a ton here and I have found the Nittos to be ALOT safer in the rain than on previous cars. I have learned to launch the Nittos on the street fairly well.

blackened88lx · Nov 3, 2009

It's all stock rideheight. Bone stock rear suspension. Just remove the quad shock, flip it around the other way and reinstall it so that the narrow side is towards the rear of the car to give the tire more clearance.

Didn't realise you were driving it in the rain. Mine gets just about daily driven on 28x9" slicks now haha. They love the rain! It floats like a boat. You could never get me to put a drag radial back on the car after seeing how these hook!

forango · Nov 4, 2009

blackened88lx said:
It's all stock rideheight. Bone stock rear suspension. Just remove the quad shock, flip it around the other way and reinstall it so that the narrow side is towards the rear of the car to give the tire more clearance.

Didn't realise you were driving it in the rain. Mine gets just about daily driven on 28x9" slicks now haha. They love the rain! It floats like a boat. You could never get me to put a drag radial back on the car after seeing how these hook!

Yeah, unfortunately down here every road is so heavily trafficed that when it rains the pavement turns into an oil slick.LOL...A couple of people on local forums around here have lost control in the rain on BFG DRs not even pushing the car half throttle.....Another reason i use Nitto's is I can get a good 12K miles out of them so i dont have to replace every 4 months. LOL

Thanks again for all the info!

Cobra912 · Nov 4, 2009

slicks for a daily driver? wow you are brave.....

blackened88lx · Nov 4, 2009

Nah. I don't drive it if it's gonna rain. I rarely get caught in the rain but if I do it's really not that bad if you use a little common sense.

tannerc91gt · Nov 4, 2009

blackened88lx said:
They will fit fine. My buddy has been through several sets of 275/50 bfgs on turbines on his gt. I had 275/50 bfgs on my 10 holes which are the same width (7"). Only thing I had to do to fit them was flip the quad shocks and massage the inner fender a tiny bit. I don't have any pics of his turbines but here's what mine looked like on the 10 holes. Can't believe how ****ty my car used to look haha.

Oh, and btw, don't waste your time with Nittos if you're looking for traction.

thats a whole lot of tire on a little wheel. your wheels have a ghetto booty

nick6690 · Nov 5, 2009

I have 28x10.5 slicks on turbines.
I had to beat the fenderwells a little and take the quads off.

Mr. Rustypwnz · Nov 5, 2009

[/IMG]

not turbines, but 10 holes with 275/50 stickey's

btw, for the past year my dd's have had slicks on them. in the rain you pull over and enjoy some nicotine..

need pics of turbines with 275/50 tires on them

forango

Active Member

fivespeedsteed

forango

Active Member

cenok is family

1990Coupe

68stang351

blackened88lx

Active Member

1987LXragtop

Member

forango

Active Member

blackened88lx

Active Member

forango

Active Member

Cobra912

Active Member

blackened88lx

Active Member

tannerc91gt

This last 25% is foreign territory at this point

nick6690

Member

Mr. Rustypwnz

Advanced Member

Similar threads

need pics of turbines with 275/50 tires on them

Active Member

Active Member

Active Member

Member

Active Member

Active Member

Active Member

Active Member

Active Member

This last 25% is foreign territory at this point

Member

Advanced Member

Similar threads

Privacy & Transparency

Privacy & Transparency