Need Shocks

[lvmustanggt]

Here is the link for shocks and Lac

http://store.summitracing.com/partd...908331+4294908282+4294924642+115&autoview=sku

http://store.summitracing.com/partd...925130+4294839061+4294848363+115&autoview=sku

 

[DTMach1]

just make sure you keep those bushings greased or they'll develop a squeek

 

[Yellow2002GT]

Strange 10 ways up front and a set of steeda coil overs in the rear.........all you need to dial in the suspension.........!

"ED"

 

[lvmustanggt]

just make sure you keep those bushings greased or they'll develop a squeek

How do you greased them ? When I get it, will it be greased ?

13.5 1/4 is my best with 1.8 60' so I am hoping to do better with my new setup. Going to race 11/08/06 at the track

 

[DTMach1]

How do you greased them ? When I get it, will it be greased ?

13.5 1/4 is my best with 1.8 60' so I am hoping to do better with my new setup. Going to race 11/08/06 at the track

When you get them, if you have to install the bushings it should come with some grease for assembly. If it has zirk fittings on it, just use a good moly grease and grease them up when you install them. I usually regrease all my zirk fittings whenever I do an oil change.

I forgot...some aftermarket control arms come with with the bushings already installed and don't require greasing...I don't know the BBK ones that well so I'm not sure. If it has a zirk fitting then you can grease as required.

 

[lvmustanggt]

Ok guys I got my KYB AGX shock today and I will be getting my BBK LAC tomorrow. I need a good wright up for LAC install and shocks install. I will be doing my install on thursday 11/02/08.

I just plased order for KYB AGX front Strut.

http://store.summitracing.com/partdetail.asp?autofilter=1&part=KYB-734014&N=700+115&autoview=sku