Needed: Lifter spider

You should be able to get them from Summit if all else fails. I think Ford Racing and Comp Cams both sell a kit that comes with the spider, dog bones, and bolts. Good luck

I can get one for you. Are you local to brothers performance? I live in Fontana, So cal if you are interested.

lookitsaaron@gmail.com

You know it's funny this topic came up with it's timing. I just finished building my new engine and ironically my lifter tie bars and the two hold down screws for the retainer went missing.

So, here's what I found out before I hit the junkyards: All 87' and up 5.0 HO engines have the roller setup (obviously), and beleieve it or not a lot of the later-model 5.0 non HO engine had a roller setup. With this in mind I looked for basically the crown vics and grand marquis somewhere in the early 90's range (just before the body and engine change to the 4.6). Some of the earlier t-birds had them (some actually had a version of the HO), and the lincoln mark 7's as well. I found what I needed in a 90' merc. grand marquis. So you don't need to look for just an HO engine to find what you are looking for.