• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

new dyno Numbers

  • Thread starter Thread starter HO5POINTO1990
  • Start date Start date Jun 17, 2006

HO5POINTO1990

New Member
Aug 12, 2003
125
0
0
San Jose
Jun 17, 2006
#1
  • Jun 17, 2006
  • #1
I just added the whole trick flow kit that goes for 2300 in most auto parts magazines, and I have full exhaust from the headers back with 30 Lb injectors, 70MM TB, 76MM MAF, and my numbers were 272 to the wheels... Has anyone used this kit and have gotten similar dissapointing numbers? I know I have not gotten it fully tuned at a shop, but I have an aftermarket CHIP by Powerdyne or something that I got from jegs.com for 240 and people are telling me I can get 30HP if i get it professionally tuned ????!!!

Just to let you know it comes with the stage one cam, trickflow heads, new rockers and upper and lower intakes. What should i be doing differently?
 

vikingpower

New Member
Dec 6, 2004
656
0
0
CWU Ellensburg, WA
Jun 17, 2006
#2
  • Jun 17, 2006
  • #2
That sounds pretty low to me, I got a similar setup and I'm pretty sure it makes a lot more than 270 to the wheels (in comparison to other cars I've driven). I'm gonna get mine dyno'ed sometime this summer as well
 

fidstang

New Member
Jul 19, 2005
307
0
0
South Lansing
Jun 17, 2006
#3
  • Jun 17, 2006
  • #3
Automatic? what type of dyno was it? What was the air to fuel ratio?
 
S

Speeds8erM-1

Founding Member
Sep 6, 2000
1,240
0
36
Pensacola Florida
Jun 18, 2006
#4
  • Jun 18, 2006
  • #4
My friend dynoed his 93 Notch years ago with TFS Heads, TFS 1 Cam, GT40 Intake and all the boltons, it only did 276 rwhp. I think the timing was wrong because his balancer was messed up.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,029
1,621
194
NJ
Jun 18, 2006
#5
  • Jun 18, 2006
  • #5
Too much injector so it was probably rich, Couple that with a c&l, and that's not good.
Take the chip out, and gently place it in the garbage, foxes with mild mods, and even some with extensive, just don't need a chip, alot of times they make the car run worse, not better.

What was the timing set at? Should run best around 14-16.

All tuning is on a fox is timing and fuel pressure, it's not a modular car that is restricted by the computer. Set your timing, drop the injectors to 24's with a pro m, and start the pressure somewhere around 40psi, and you get around 300 to the wheels, which is where is should be.
 
You must log in or register to reply here.

Similar threads

S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
827
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
X
VE Table Not Dialed? Send Me Your Datalog.
  • X-cam34
  • Feb 8, 2026
  • Digital Self-tuning Forum
  • 2 3
Replies
49
Views
1K
Digital Self-tuning Forum May 1, 2026
X-cam34
X
M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
697
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
W
Help with 95 GT
  • waynewl34
  • Apr 5, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
304
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 5, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?