New injectors?

91ghp5.0

Active Member
May 25, 2005
42
0
28
Somewhere
I did a search, and didnt find anything on this, so i guess i'll ask. The fresh 306 is goin into my car as we speak, and ill soon be doing a few bolt ons. The 306 already has a B cam in it, and im probably gonna do the cobra intake (that comes w/ a gt40 lower, correct?). along with the upper/lower will be a BBK fenderwell mount CAI, a 70 mm throttle body, and either a 70 or 75 mm (suggestions?) mass air meter. im still in school, so money is tight. within the next few months i'd like to do AFR 165s as well. will i have to get 24# (or bigger) injectors when i go to aftermarket heads? the problem is, i want to buy the C&L or granatelli mass air meter now, tuned for the stock 19# injectors, and i dont really want to have to buy another mass air meter, along with heads and new injectors. thanks for the help in advance!
-D
 
I had a 302 with the AFR 165s and 19 lb injectors. personally, I had no problems with them. The car still ran great and I dynod the car with them and A/F was a little lean but nothing near enough to threaten your motor. 24 lb injectors were installed later and I noticed a substantial difference in pickup.
 
why not get a pro-m rated for 24# injectors and the injectors and put them in now. have it dyno tuned and youll be fine. or you can just adjust the fuel pressure down a bit. once you add a couple more mods youll need the bigger injectors anyways
youll defenitely want to get a larger fuel pump.