New MSPNP2 user!

Blown88GT

Founding Member

Nov 13, 1999

2,283

524

164

Palm Beach Gardens, FL

Aug 12, 2019

#41

• Aug 12, 2019

• #41

MSPNP doesn't use 3.57 board from MS2. What it uses is unique to it. Online docs have errors which DIY refuses to fix. I don't have MSPNP to verify WOT relay operation. I found some internal pics online. Might have something to do with jumper J5. No docs to tell you how to configure it, other than it should not be changed.

 

Attachments

• MSPNPG2_01.webp

  261.3 KB · Views: 152
• MSPNPG2_02.webp

  178 KB · Views: 226

Last edited: Aug 12, 2019

a91what

SendMeUrDataLog

10 Year Member

Apr 6, 2011

10,739

6,720

214

Hillsborough county

Aug 12, 2019

#42

• Aug 12, 2019

• #42

FWIW my diypnp has a 3.57 board.

 

Blown88GT

Founding Member

Nov 13, 1999

2,283

524

164

Palm Beach Gardens, FL

Aug 12, 2019

#43

• Aug 12, 2019

• #43

I think you are mistaken. The DIYPNP is unique. It might be based off the 3.57.

 

a91what

SendMeUrDataLog

10 Year Member

Apr 6, 2011

10,739

6,720

214

Hillsborough county

Aug 13, 2019

#44

• Aug 13, 2019

• #44

If I remember this thread when the ecu comes out I will have to pull the thing apart and check.

 

Blown88GT

Founding Member

Nov 13, 1999

2,283

524

164

Palm Beach Gardens, FL

Aug 13, 2019

#45

• Aug 13, 2019

• #45

This pic is from DIY's old website.


This pic is mine. Says DIYPNP F60 V1.0. My later pics have more mods.
The F60 is only for the Ford (i.e. Ford 60-pin connector)



Latest version with all my additions (messy).

 

Last edited: Aug 13, 2019

Reactions: Anti_Hero0932

a91what

SendMeUrDataLog

10 Year Member

Apr 6, 2011

10,739

6,720

214

Hillsborough county

Aug 13, 2019

#46

• Aug 13, 2019

• #46

About as modded as it gets... direct coil control, sequential injection mod, and tinyxio expansion installed...

Also messy

 

Blown88GT

Founding Member

Nov 13, 1999

2,283

524

164

Palm Beach Gardens, FL

Aug 14, 2019

#47

• Aug 14, 2019

• #47

Had to look this up in my manual: "The DIYPNPF60 does not include any of the transistors Q1 through Q4."
They must be for the direct coil control, a.k.a. EDIS
With the oversize supercharger crank pulley, I have no room at all for a crank sensor.

I guess this is settled?
The DIYPNP is unique, not like the MSPNP (other than the Microsquirt Module) or MS 3.57.
All versions use the same cpu (microcontroller), Motorola (now Freescale) MC9S12C

One of my mods is a selector switch to disable the WBO2 & enable the NBO2 on the passenger side.
Never had to use it, yet.

I just found my folder with all the pics for the A/C mods.
There was a guy on the MSExtra forum that got me started.
He actually had someone machine the DIY case to the same height as the A9L.
Since I'm satisfied with it mounted under the glove box (harness just reaches), no need for this.
My advantage is it can be removed in few minutes without kick panel contortions.

 

Last edited: Aug 14, 2019

a91what

SendMeUrDataLog

10 Year Member

Apr 6, 2011

10,739

6,720

214

Hillsborough county

Aug 14, 2019

#48

• Aug 14, 2019

• #48

I have a custom crank pulley made by asp, if you buy an aftermarket balancer that requires a spacer for proper fox dress fitment you can use a trigger and sensor from 64bittuning to get the job done.

 

Blown88GT

Founding Member

Nov 13, 1999

2,283

524

164

Palm Beach Gardens, FL

Aug 14, 2019

#49

• Aug 14, 2019

• #49

That's the problem, a spacer will cause the crank pulley & auto tensioner to hit the e-fan.
My pulleys are custom, 1-piece.
I'm okay with the distributor.

 

a91what

SendMeUrDataLog

10 Year Member

Apr 6, 2011

10,739

6,720

214

Hillsborough county

Aug 14, 2019

#50

• Aug 14, 2019

• #50

are you using the factory balancer? if yes then no you cannot add the wheel. If you buy a balancer that is more universal, say for a 240-351 sbf then it can be made to fit as it is shorter. A spacer would be required to get proper pulley alignment this is where the trigger and spacer come into play.

 

Blown88GT

Founding Member

Nov 13, 1999

2,283

524

164

Palm Beach Gardens, FL

Aug 14, 2019

#51

• Aug 14, 2019

• #51

Not any more.