1. No problem fitting the STB with the fox setup?
2. Are you running the hard water lines on intake or hoses?
3. How easy/hard was it to get the Vortech D/C tube to connect...I want this setup with the polished D/C tube.
1. No problem fitting the STB with the fox setup?
2. Are you running the hard water lines on intake or hoses?
3. How easy/hard was it to get the Vortech D/C tube to connect...I want this setup with the polished D/C tube.
1. No problem fitting the STB with the fox setup?
2. Are you running the hard water lines on intake or hoses?
3. How easy/hard was it to get the Vortech D/C tube to connect...I want this setup with the polished D/C tube.
1. its a 94/95 bbk brace that i had to modify to make it work with the fox discharge tube.
2. neither, no heat in the car.
3. i had to cut about 2 inches off of the discharge tube at the blower end.
1. its a 94/95 bbk brace that i had to modify to make it work with the fox discharge tube.
2. neither, no heat in the car.
3. i had to cut about 2 inches off of the discharge tube at the blower end.
no problem. i cut the discharge with a small hacksaw, piece of cake. as far as the couplers i didn't have to use anything special, just a regular silicone coupler. i think its a 3" coupler.
no problem. i cut the discharge with a small hacksaw, piece of cake. as far as the couplers i didn't have to use anything special, just a regular silicone coupler. i think its a 3" coupler.
Thanks...Im going to a similar setup keeping the PS and A/C and mechanical WP. I will be putting a polished Systemax intake, discharge tube, and Accufab TB..
Thanks
RC