• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

New Track Times!

  • Thread starter Thread starter Rickyll7
  • Start date Start date Nov 22, 2006

Rickyll7

Member
Dec 16, 2005
718
4
19
Nov 22, 2006
#1
  • Nov 22, 2006
  • #1
So I ran a 13.814 @ 105.2

r/t 0.100
60ft 2.176
330 6.008
1/8 9.075
mph 80.42
1000 11.656
1/4 13.814
mph 105.2

This was with whats in my sig. I spun some through 1st and 2nd. I think I had some wheel hop. I plan on putting in some new quadra shocks, they are removed for now. I also ran 25 psi. What do yall think? Should I lower the pressure some more? What about 20 psi? Is that too low?
 
D

Dragstr05

New Member
Dec 21, 2004
643
1
0
Stafford VA
Nov 22, 2006
#2
  • Nov 22, 2006
  • #2
I sure hope thats a typo. Please tell me with all those mods you didnt run just a 13.8...
 

Rickyll7

Member
Dec 16, 2005
718
4
19
Nov 22, 2006
#3
  • Nov 22, 2006
  • #3
Yea, I dont get it either.
 
D

Dragstr05

New Member
Dec 21, 2004
643
1
0
Stafford VA
Nov 22, 2006
#4
  • Nov 22, 2006
  • #4
That really is a 13.8? Thats just not right at all.

First things first, get that 60' down. Then work on hitting them gears better goin down the track. Something isnt right here you should be deep into the 13's atleast with those power mods.
 

steveb24

New Member
Nov 28, 2005
555
0
0
wilmington, DE
Nov 22, 2006
#5
  • Nov 22, 2006
  • #5
i ran a 13.7 w a prochamber tune and stock gears. wow
 

Rickyll7

Member
Dec 16, 2005
718
4
19
Nov 23, 2006
#6
  • Nov 23, 2006
  • #6
So what am I doing wrong?
 

Warrior 102

New Member
Jan 22, 2003
231
0
0
Macomb MI
Nov 23, 2006
#7
  • Nov 23, 2006
  • #7
Dude your 60 ft suck,get sticky tires and work your clutch of the line,whit the power you pouting down you should run 12s easy,
I know this for a fact that I did it whit my stroker, I run 12,7s all day long I dint even give it a 100% i lunch at 2800rpm and shift gears at 5500rpm.
 

mustangkid05

New Member
Mar 10, 2006
199
0
0
Nov 23, 2006
#8
  • Nov 23, 2006
  • #8
yea deffinately work on your launch just baby it and then stomp it
 

04GTMustang

New Member
Feb 28, 2006
348
0
0
Stafford
Nov 23, 2006
#9
  • Nov 23, 2006
  • #9
Warrior 102 said:
Dude your 60 ft suck,get sticky tires and work your clutch of the line,whit the power you pouting down you should run 12s easy,
I know this for a fact that I did it whit my stroker, I run 12,7s all day long I dint even give it a 100% i lunch at 2800rpm and shift gears at 5500rpm.
Click to expand...
dang you lunch at 2800rpm. Usually i lunch at around 12:30.lol I launch around 3k and slip the clutch out and i ran a 2.07 with half the stuff you have on smaller tires lol ive got little 245s out back and i still got that 60'. Just keep practicing with that speed you should be deep into the 13s you just need a lot of practice.
 

Rickyll7

Member
Dec 16, 2005
718
4
19
Nov 23, 2006
#10
  • Nov 23, 2006
  • #10
Thanks yall. Ill put some new quadra shocks in, some long tubes I have on the way, and LOTS of practice.
 

[Twitch]

Member
Mar 30, 2005
168
0
16
Montreal
Nov 24, 2006
#11
  • Nov 24, 2006
  • #11
Rickyll7 said:
So I ran a 13.814 @ 105.2

r/t 0.100
60ft 2.176
330 6.008
1/8 9.075
mph 80.42
1000 11.656
1/4 13.814
mph 105.2

This was with whats in my sig. I spun some through 1st and 2nd. I think I had some wheel hop. I plan on putting in some new quadra shocks, they are removed for now. I also ran 25 psi. What do yall think? Should I lower the pressure some more? What about 20 psi? Is that too low?
Click to expand...

With the power listed in you sig, even with a 2.1 60ft, you could have done a better time.

This is one of my time slip, not the best, but as a comparison

Reaction---.048
60ft-------2.149
1/8 ET-----8.729
1/4 ET-----13.412
1/4 MPH---109.155

I'm pretty sure I'm no where close to your power. We cut almost the same sucky 60ft, but look at after the 60ft compared to yours.

My current mods are:
- VT N/A Stage 1 Cams
- K&N FIPK2
- Mac Prochamber O/R
- BBK 75mm Throttle Body
- Diablosport Predator
- GMS Upper Intake Plenum
- Steeda U/D Pulleys
- FRPP 3.73 Gears
- Street tires (Exclaim UHP)
- Bullitt Suspension Kit
- SVT Cobra Front Brakes
 

steveb24

New Member
Nov 28, 2005
555
0
0
wilmington, DE
Nov 24, 2006
#12
  • Nov 24, 2006
  • #12
04GTMustang said:
dang you lunch at 2800rpm. Usually i lunch at around 12:30.lol I launch around 3k and slip the clutch out and i ran a 2.07 with half the stuff you have on smaller tires lol ive got little 245s out back and i still got that 60'. Just keep practicing with that speed you should be deep into the 13s you just need a lot of practice.
Click to expand...

lol.. had me laughin for a sec there. than i thought about my blown out plug and stopped.
 
You must log in or register to reply here.

Similar threads

Forced Induction Total Timing under boost
  • Dontknowchit
  • Aug 27, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
300
Fox 5.0 Mustang Tech Aug 28, 2025
Dontknowchit
O
Resolved Vibration issues
  • oNORMo
  • Dec 3, 2023
  • Fox 5.0 Mustang Tech
Replies
11
Views
2K
Fox 5.0 Mustang Tech Dec 22, 2023
oNORMo
O
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
J
New 98 Mustang Cobra Owner
  • jtoates72
  • Apr 14, 2023
  • SVT Tech Forum
Replies
1
Views
1K
SVT Tech Forum Apr 19, 2023
Shuttleman83
S
J
89 2.3 LX running rich, hesitation on acceleration, high and hanging idle Help!
  • jpstucky
  • Jun 13, 2023
  • 2.3L (N/A & Turbo) Tech
Replies
4
Views
3K
2.3L (N/A & Turbo) Tech Jun 15, 2023
jpstucky
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?