New Track Times!

[Rickyll7]

So I ran a 13.814 @ 105.2

r/t 0.100
60ft 2.176
330 6.008
1/8 9.075
mph 80.42
1000 11.656
1/4 13.814
mph 105.2

This was with whats in my sig. I spun some through 1st and 2nd. I think I had some wheel hop. I plan on putting in some new quadra shocks, they are removed for now. I also ran 25 psi. What do yall think? Should I lower the pressure some more? What about 20 psi? Is that too low?

 

[Dragstr05]

I sure hope thats a typo. Please tell me with all those mods you didnt run just a 13.8...

 

[Rickyll7]

Yea, I dont get it either.

 

[Dragstr05]

That really is a 13.8? Thats just not right at all.

First things first, get that 60' down. Then work on hitting them gears better goin down the track. Something isnt right here you should be deep into the 13's atleast with those power mods.

 

[steveb24]

i ran a 13.7 w a prochamber tune and stock gears. wow

 

[Rickyll7]

So what am I doing wrong?

 

[Warrior 102]

Dude your 60 ft suck,get sticky tires and work your clutch of the line,whit the power you pouting down you should run 12s easy,
I know this for a fact that I did it whit my stroker, I run 12,7s all day long I dint even give it a 100% i lunch at 2800rpm and shift gears at 5500rpm.

 

[mustangkid05]

yea deffinately work on your launch just baby it and then stomp it

 

[04GTMustang]

Dude your 60 ft suck,get sticky tires and work your clutch of the line,whit the power you pouting down you should run 12s easy,
I know this for a fact that I did it whit my stroker, I run 12,7s all day long I dint even give it a 100% i lunch at 2800rpm and shift gears at 5500rpm.

dang you lunch at 2800rpm. Usually i lunch at around 12:30.lol I launch around 3k and slip the clutch out and i ran a 2.07 with half the stuff you have on smaller tires lol ive got little 245s out back and i still got that 60'. Just keep practicing with that speed you should be deep into the 13s you just need a lot of practice.

 

[Rickyll7]

Thanks yall. Ill put some new quadra shocks in, some long tubes I have on the way, and LOTS of practice.

 

[[Twitch]]

So I ran a 13.814 @ 105.2

r/t 0.100
60ft 2.176
330 6.008
1/8 9.075
mph 80.42
1000 11.656
1/4 13.814
mph 105.2

This was with whats in my sig. I spun some through 1st and 2nd. I think I had some wheel hop. I plan on putting in some new quadra shocks, they are removed for now. I also ran 25 psi. What do yall think? Should I lower the pressure some more? What about 20 psi? Is that too low?

With the power listed in you sig, even with a 2.1 60ft, you could have done a better time.

This is one of my time slip, not the best, but as a comparison

Reaction---.048
60ft-------2.149
1/8 ET-----8.729
1/4 ET-----13.412
1/4 MPH---109.155

I'm pretty sure I'm no where close to your power. We cut almost the same sucky 60ft, but look at after the 60ft compared to yours.

My current mods are:
- VT N/A Stage 1 Cams
- K&N FIPK2
- Mac Prochamber O/R
- BBK 75mm Throttle Body
- Diablosport Predator
- GMS Upper Intake Plenum
- Steeda U/D Pulleys
- FRPP 3.73 Gears
- Street tires (Exclaim UHP)
- Bullitt Suspension Kit
- SVT Cobra Front Brakes

 

[steveb24]

dang you lunch at 2800rpm. Usually i lunch at around 12:30.lol I launch around 3k and slip the clutch out and i ran a 2.07 with half the stuff you have on smaller tires lol ive got little 245s out back and i still got that 60'. Just keep practicing with that speed you should be deep into the 13s you just need a lot of practice.

lol.. had me laughin for a sec there. than i thought about my blown out plug and stopped.