New Twisted Wedge 11 R heads!

Gregg@TFS · Nov 13, 2012

Ground breaking news from the floor of SEMA, that's right folks the innovators are back!! Trick Flow Specialties has come out with a NEW Twisted Wedge head for the small block Ford. I know what you are thinking. How can Trick Flow improve o...
r change the number one small block Ford head of all time? Well let me tell you about it and introduce to you the Twisted Wedge 11R cylinder heads.

-Trick Flow took the stand 15 degree intake valve, 17 degree exhaust valve arrangement and stood them up. The new head now has an 11 degree intake and 13 degree exhaust angle.

-Full CNC ported with CNC profiled chambers. Even the casting is CNC machined to give the new head a billet look.

-8mm valves

-Light weight 1.300 hydraulic roller valve springs

-7/16 rocker studs

-1/2" heads bolt holes

-Optional titanium or chromoly retainers

-Multiple port and chamber options

-Multi-angle valve job

-Ductile iron seats and bronze alloy valve guides

I know a lot of you will have many questions on the new heads and I will be updating you with more information as soon as possible so keep your eyes open.

srtthis · Nov 13, 2012

i saw these posted on facebook....

here is the question everyone wants to know

HOW MUCH!

Gregg@TFS · Nov 13, 2012

Pricing will be available through our vendors after the first of the year.

srtthis · Nov 13, 2012

cool... im guessing some where in the mid 300Cfm?

Gregg@TFS · Nov 13, 2012

We are not releasing flow numbers until all the port and chamber variations are developed.

Noobz347 · Nov 13, 2012

Gregg@TFS said:
We are not releasing flow numbers until all the port and chamber variations are developed.

Ok well... it's shiney!

NIKwoaC · Nov 13, 2012

Stock port locations?

89stang1 · Nov 13, 2012

very nice! cant wait to see some head to head tests against AFR

90lxcoupe · Nov 13, 2012

What head does AFR have that is even comparable to this cylinder head?

srtthis · Nov 13, 2012

90lxcoupe said:
What head does AFR have that is even comparable to this cylinder head?

honestly... nothing

and hoesntly they dont have anything for current trick flows

85_SS_302_Coupe · Nov 13, 2012

Whatever you do just don't say it's the best one on the market.

srtthis · Nov 13, 2012

85_SS_302_Coupe said:
Whatever you do just don't say it's the best one on the market.

ive learned one thing in my years designing stuff... some ones ALWAYS trying to make a better mouse trap!

5LiterWes · Nov 13, 2012

I'm excited to see some reviews...

85_SS_302_Coupe · Nov 13, 2012

Anyone else surprised to see companies still working to improve the 5.0 cylinder head? It's proof of two things:

1) Ford really sucks and left a lot on the table with this engine, and if they continued developing the 302 instead of the mod engines, who knows what they'd have by now (not knocking the mod motors, they're awesome..just saying)

2) 5.0 performance is never going to die.

I think what we're seeing though is CNC technology advancing to the point that it's starting to catch up with hand porting skills. Before long they'll just make raw castings that are custom CNC'ed instead of hand ported for a particular application.

NIKwoaC · Nov 13, 2012

85_SS_302_Coupe said:
Anyone else surprised to see companies still working to improve the 5.0 cylinder head? It's proof of two things:

1) Ford really sucks and left a lot on the table with this engine, and if they continued developing the 302 instead of the mod engines, who knows what they'd have by now (not knocking the mod motors, they're awesome..just saying)

2) 5.0 performance is never going to die.

I think what we're seeing though is CNC technology advancing to the point that it's starting to catch up with hand porting skills. Before long they'll just make raw castings that are custom CNC'ed instead of hand ported for a particular application.

Oh, I think CNC has long surpassed hand porting. I'm sure there is some hand blending that goes on during the development stage of the prototype ports, but I'd be willing to bet that the majority of the high end stuff is developed with flow analysis software, modeled in CAD, and sent straight to the CNC machining center.

85_SS_302_Coupe · Nov 13, 2012

NIKwoaC said:
Oh, I think CNC has long surpassed hand porting. I'm sure there is some hand blending that goes on during the development stage of the prototype ports, but I'd be willing to bet that the majority of the high end stuff is developed with flow analysis software, modeled in CAD, and sent straight to the CNC machining center.

Well, i don't know if i'm ready to surrender to the machines just yet. I'm sure there's some wise old sage out there who can hand port and work his magic on a set of heads like nobody's business, but I have no doubt that CNC porting is far superior from an equal runner perfection stand point. Even the most experienced hand porter is gonna have issues making each runner the exact same size and shape, whereas a CNC mill makes the exact same port every time.

One of the only reasons i haven't bought aftermarket heads yet (besides being poor) is because the guy who did my valves was so impressed with the hand porting job. He was an older guy and has been doing heads/machine work for longer than i've been alive, so if he's impressed then it must be a pretty stellar job.

Noobz347 · Nov 13, 2012

85_SS_302_Coupe said:
Well, i don't know if i'm ready to surrender to the machines just yet.

I will... just as soon as I can buy a TV that pays all the bills.

srtthis · Nov 13, 2012

85_SS_302_Coupe said:
Anyone else surprised to see companies still working to improve the 5.0 cylinder head? It's proof of two things:
.

Not in the least these aren't a run of the mill heads you would put on a street car. The small block ford performance world will never die...

ratio411 · Nov 13, 2012

I am a bit scared of TF stuff nowadays though with people on the forums talking about bad quality (fit and finish).

The stuff looks great in the promotion pics though.

ratio411 · Nov 13, 2012

85_SS_302_Coupe said:
Anyone else surprised to see companies still working to improve the 5.0 cylinder head? It's proof of two things:

1) Ford really sucks and left a lot on the table with this engine, and if they continued developing the 302 instead of the mod engines, who knows what they'd have by now (not knocking the mod motors, they're awesome..just saying)

2) 5.0 performance is never going to die.

I think what we're seeing though is CNC technology advancing to the point that it's starting to catch up with hand porting skills. Before long they'll just make raw castings that are custom CNC'ed instead of hand ported for a particular application.

The LSx engines are proof positive that Ford jumped the gun on declaring the pushrod dead.
Ever since the LSx came out in 97, Ford has been trying desperately to keep up.

New Twisted Wedge 11 R heads!

Gregg@TFS

srtthis

the guy doing it does every local racers rear end

Gregg@TFS

srtthis

the guy doing it does every local racers rear end

Gregg@TFS

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

NIKwoaC

中國製造

89stang1

Stroked and Juiced

90lxcoupe

srtthis

the guy doing it does every local racers rear end

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

srtthis

the guy doing it does every local racers rear end

5LiterWes

Member

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

NIKwoaC

中國製造

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

srtthis

the guy doing it does every local racers rear end

ratio411

ratio411

Similar threads

New Twisted Wedge 11 R heads!

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

Stangnet Facilities Maint Tech... Er... Janitor

中國製造

Stroked and Juiced

the guy doing it does every local racers rear end

it sucks (I know) to be on the receiving end

the guy doing it does every local racers rear end

Member

it sucks (I know) to be on the receiving end

中國製造

it sucks (I know) to be on the receiving end

Stangnet Facilities Maint Tech... Er... Janitor

the guy doing it does every local racers rear end

Similar threads

Privacy & Transparency

Privacy & Transparency