Nitrous and Gear Question

A

aNotchAbove

New Member

Jun 7, 2006

75

0

0

Jan 9, 2008

#1

• Jan 9, 2008

• #1

So I'm running a trickflow trackheat top end kit on my fox and was looking to add some juice to the mix. I'm looking to get an NX wet EFI plate kit that goes between the upper and lower intake. How much of a shot could I run? 100? 125? 150? The car will be driven 80% without the juice and 20% on the juice at the track. Everything will be SCT tuned once I get everything together.

Also, would a 4:10 gear with a 275/50r15 tire be too much for this setup (on and off the juice)?

 

PUNISHER RACING

Active Member

Aug 27, 2007

1,124

0

36

FORD CITY, PA.

Jan 9, 2008

#2

• Jan 9, 2008

• #2

Will work fine if you can shift quick! Get a good ignition setup with a rev limiter you miss a gear spraying 150 shot it will blow your diamond plate floor board off(scary)!!!!!

 

Mr. Rustypwnz

Advanced Member

Jun 1, 2005

1,761

63

69

indianapolis/ valdosta ga

Jan 9, 2008

#3

• Jan 9, 2008

• #3

I blew my intake welds, with a 15 shot so a 150 would be mad!!!

 

A

aNotchAbove

New Member

Jun 7, 2006

75

0

0

Jan 10, 2008

#4

• Jan 10, 2008

• #4

slow95gt said:

I blew my intake welds, with a 15 shot so a 150 would be mad!!!

Click to expand...

Was that a serious comment?

 

STREETRACEMY50

Founding Member

May 30, 2000

542

0

0

columbia s.c.

Jan 10, 2008

#5

• Jan 10, 2008

• #5

150 shot will be fine, i used to run a 175 shot (mine was nitrous works throttle body plate)on a stock motor(bolt ons) and stock fuel system with no problems. just back off the timing 1 degree for every 50hp and get some colder plugs and use less gap with them.

 

8

86bluecobra

Advanced Member

Dec 20, 2004

4,265

12

69

B.C. Canada

Jan 15, 2008

#6

• Jan 15, 2008

• #6

I have 3.73's and a 150 hp shot of juice. First gear goes by really fast and so does second. 4.10s would be worse. 3.73 would be the most gear i would want to try to shift. Or maybe have nitrous come on in second gear.