• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Nitrous Kit Questions

  • Thread starter Thread starter Patrick Utecht
  • Start date Start date May 6, 2014

Patrick Utecht

New Member
Apr 30, 2014
3
0
2
League City, TX
May 6, 2014
#1
  • May 6, 2014
  • #1
I've been planning to spray my 99 since I picked it up. I had my heart set on the NX plate kit, but have since realized that I can't use it with my Trick Flow intake manifold. What kit would you guys recommend for the car. Some of the mods include 3.73 gears, lower control arms, built automatic with 2800 stall, trick flow manifold, 75mm tb, CAI, long tubes, ORX, magnapack catback, pullies, and a tune. I'm wanting to hit it with 150, have it dyno tuned by PSI motorsports, and run it with a slick. Any ideas on what 1/4 mile times I may see out of it?
 

flstang65

10 Year Member
Dec 6, 2007
1,484
135
94
SE Georgia
May 6, 2014
#2
  • May 6, 2014
  • #2
Why can't you use it with your trick flow intake?
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
May 6, 2014
#3
  • May 6, 2014
  • #3
Ditch the plate kit and go with a single fogger.
 

Patrick Utecht

New Member
Apr 30, 2014
3
0
2
League City, TX
May 6, 2014
#4
  • May 6, 2014
  • #4
The plate is designed to go between the upper plentum and the intake manifold. With the Trick Flow, I don't have that option.
 

Patrick Utecht

New Member
Apr 30, 2014
3
0
2
League City, TX
May 6, 2014
#5
  • May 6, 2014
  • #5
Mr. Rustypwnz said:
Ditch the plate kit and go with a single fogger.
Click to expand...

How far from the throttle body should the jet be placed? Forgive my ignorance, I've always ran plates on carbed engines.
 

sneaky98gt

10 Year Member
Apr 23, 2008
2,387
144
114
NC State University
May 6, 2014
#6
  • May 6, 2014
  • #6
Patrick Utecht said:
How far from the throttle body should the jet be placed? Forgive my ignorance, I've always ran plates on carbed engines.
Click to expand...

Maybe someone with more experience could correct me if needed, but I don't think it matters. Since the throttle body is wide open when you spray the nitrous (or at least should be), I don't think it'd matter how far away it is as long as it's not in front of the MAF sensor.
 
D

Deleted member 38176

May 6, 2014
#7
  • May 6, 2014
  • #7
Mr. Rustypwnz said:
Ditch the plate kit and go with a single fogger.
Click to expand...

+1

Patrick Utecht said:
How far from the throttle body should the jet be placed? Forgive my ignorance, I've always ran plates on carbed engines.
Click to expand...

Ideally, as close to the TB as possible
 
You must log in or register to reply here.

Similar threads

M
03 GT Misfire at idle only, calling all experts!
  • midnight03
  • Feb 27, 2024
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
859
1996 - 2004 SN95 Mustang -General/Talk- Feb 27, 2024
midnight03
M
J
68 Mustang with Foxbody Engine Stalling Issues - MSPNP2
  • JayV68Stang
  • Mar 13, 2025
  • Digital Self-tuning Forum
Replies
3
Views
401
Digital Self-tuning Forum Mar 13, 2025
JayV68Stang
J
A
Engine 93 lx top end kit install now has no power.
  • anorth93
  • Aug 20, 2023
  • Fox 5.0 Mustang Tech
  • 4 5 6
Replies
107
Views
12K
Fox 5.0 Mustang Tech Nov 25, 2023
Mindseye007
For Sale 3-owner 1987 Mustang GT, $18K obro, Lancaster CA
  • Bill Cool
  • Oct 6, 2024
  • Fox Body Mustangs For Sale (1979-93)
Replies
4
Views
2K
Fox Body Mustangs For Sale (1979-93) Oct 13, 2024
nickyb
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?