nitrous nossle isnt real tight...

A

ANGRMNGT

New Member

Aug 26, 2004

75

0

0

NC

Nov 5, 2006

#1

• Nov 5, 2006

• #1

I've got a zex nitrous kit and i cant get the nossle very tight into the inlet tube. Ive got an after market CAI with a thin metal tube. it doesnt seem to give me enough threads to secure the nossle properly.

I was wondering if there are any tricks that i might be able to do, besides replacing the inlet tube.

thx

 

triggz

Founding Member

May 15, 2002

1,218

0

37

Gadsden, AL

Nov 5, 2006

#2

• Nov 5, 2006

• #2

the tube may have too much curve in it to allow the nozzle nut to sit flat against it, maybe hammer it flat some?

just dont try to spray without it being totally secured. 1000psi running through that line will make it swing around like a firehose out of control.

 

A

ANGRMNGT

New Member

Aug 26, 2004

75

0

0

NC

Nov 5, 2006

#3

• Nov 5, 2006

• #3

the nossle is secure now, looks like hell but its not going anywhere. just looking for some ideas short of welding it. Something more permenant and less ghetto then tie wraps.

 

the98stang

Active Member

Aug 12, 2005

2,408

0

47

Clovis, CA

Nov 5, 2006

#4

• Nov 5, 2006

• #4

ANGRMNGT said:

the nossle is secure now, looks like hell but its not going anywhere. just looking for some ideas short of welding it. Something more permenant and less ghetto then tie wraps.

Click to expand...

maybe JB weld?