NPI cams - which one to run

steedastangt

Founding Member

Aug 29, 2001

141

0

0

newbraunfels,tx

Jul 26, 2007

#1

• Jul 26, 2007

• #1

I have svo heads and intake and am finally getting around to installing cams. I have done some research on Crower and Comp as they offer cams that will work with my heads and not have PTV problems. I am looking to get as much power as possible. My stang is a weekend/fun car so i wont have to deal with commuting or heavy traffic issues. What is everyones recommendations?

PS: I heard none of VT's cams will work on my car due to lift so no need to go into them unless they have a new offereing.

Thanks, Matt

 

steedastangt

Founding Member

Aug 29, 2001

141

0

0

newbraunfels,tx

Jul 27, 2007

#2

• Jul 27, 2007

• #2

lets try one more time...

 

DropTopPony

Noob Slayer

Founding Member

Aug 13, 2002

2,570

3

48

south jersey

Jul 27, 2007

#3

• Jul 27, 2007

• #3

I like the Crower NPI's...
I thought you could run a higher lift cam with the SVO's?

 

T

TGJ

New Member

Mar 30, 2005

1,049

4

0

Jul 28, 2007

#4

• Jul 28, 2007

• #4

SVO heads are based off of the NPI head and have the same lift restrictions that NPI heads have. That said, I would likely go with the Stage 3 NPI Crower cam or the Comp 274 NPI cam for your car.

 

steedastangt

Founding Member

Aug 29, 2001

141

0

0

newbraunfels,tx

Jul 28, 2007

#5

• Jul 28, 2007

• #5

thanks guys. I will probably be going with the crower stage 3. Bye bye low end. Hello redline.....

 

mrvax

Stay thirsty my friends

Founding Member

Nov 29, 1999

5,225

3

79

SN Moderator: Orlando, Fl.

Jul 28, 2007

#6

• Jul 28, 2007

• #6

steedastangt said:

thanks guys. I will probably be going with the crower stage 3. Bye bye low end. Hello redline.....

Click to expand...

Well, looks like you will just have to select the correct set of gears to work with your cams.

Good luck, you have a fairly rare combo. Post back a thread letting us know how it goes!

 

steedastangt

Founding Member

Aug 29, 2001

141

0

0

newbraunfels,tx

Jul 30, 2007

#7

• Jul 30, 2007

• #7

mrvax said:

Well, looks like you will just have to select the correct set of gears to work with your cams.

Good luck, you have a fairly rare combo. Post back a thread letting us know how it goes!

Click to expand...

I sure will. I'm really excited about the cams because i havent added a significant mod since the heads/intake. I've heard of big numbers coming from cams but can only imagine what it will be like going from my wimpy stock cams to the stage 3's. I will see if i can get a before and after dyno. That would be really interesting...

Thx,

matt