• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

O-Ringed Heads?

  • Thread starter Thread starter Black Sun 5.0
  • Start date Start date Oct 13, 2005

Black Sun 5.0

Founding Member
Mar 23, 2002
1,337
0
36
L.I., N.Y.
Oct 13, 2005
#1
  • Oct 13, 2005
  • #1
I was looking at some Edelbrock Performer heads online and noticed that they offer an "o-ringed" version of the same heads designed for supercharged and NOS vehicles. What are the pro's and con's of these heads vs. the standard ones? I ask because I keep talking myself out of upgrading my heads again but I do plan on a supercharger in the future.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Oct 13, 2005
#2
  • Oct 13, 2005
  • #2
The pro of O-ringed heads is that they don't blow headgaskets easily. The downside is that now instead of blowing just your headgasket, you have more catastrophic failure, should something go awry in the combustion chamber. Typically those using O-ring heads are using upgraded components in the short block that will withstand the factors that caused the person to use the O-ring head gaskets in the first place. I wouldn't personally use them on a stock short block, just for the piece of mind that I may save it from meltdown by losing a gasket instead.
 

Black Sun 5.0

Founding Member
Mar 23, 2002
1,337
0
36
L.I., N.Y.
Oct 13, 2005
#3
  • Oct 13, 2005
  • #3
Sounds like a good explanation, too bad they don't mention that in the item description. I'm not even sure if it's worth upgrading to the Edelbrock heads from my Windsor Jr's.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Oct 13, 2005
#4
  • Oct 13, 2005
  • #4
You just have to know the limits of your engine. A 200 shot NOS will blow your stock shortblock either way. The non-oring headgaskets can create a failsafe but you can't depend on that if your engine wasn't up to the task in the first place. I opted for the o-ring heads to make sure that the gaskets never blew agian(what started my whole H/I/C).
Kevin
Kevin
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
319
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
186
The Welcome Wagon Jul 3, 2026
5150K
5
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 28, 2026
from6to8
Engine HELP - 351W Based Build Under Stock Hood
  • thinkfaster
  • Oct 17, 2024
  • Fox 5.0 Mustang Tech
Replies
13
Views
2K
Fox 5.0 Mustang Tech Dec 31, 2025
Qtrhrse23
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?