Possibly. I'll play around with it tonight after the sun goes down. The reason that the whole head is red now is because I gave her long hair. You can see she's clutching it in her right hand. However, the effect did not turn out as I had anticipated.
I'm with you guys (you probably guessed). I like the look of the first one better too. So, the flaming red hair is gone and I'll shoot for just bit more red than in the first pic but not enough to wash it all red.
Our proprietary controller board. It's fully operational but not completely finished. The board I'm holding up is missing 3 terminals and two LEDs.
A you can probably tell, each board has 4 outputs (triggers) and 2 inputs (sensors). The micro-controller you see there is your run-of-the-mill ESP8266 mounted on some Chinese knock-off board that is in-turn, mounted to our board.
Our board takes the place of the break-out boards you see here:
A you can probably tell, each board has 4 outputs (triggers) and 2 inputs (sensors). The micro-controller you see there is your run-of-the-mill ESP8266 mounted on some Chinese knock-off board that is in-turn, mounted to our board.
Our board takes the place of the break-out boards you see here:
Last edited:
I want to do a band with 3 skeletons. Singer, drummer, and guitar. They won't actually play instruments but has to look decent. Maybe a 5 axis skull for the singer and 3 axis for the other two.
Last week we went to a performance of "Sweeney Todd, The Demon Barber of Fleet Street" at the Cumberland Playhouse in Crossville, TN. Really well done.
http://www.ccplayhouse.com/
http://www.ccplayhouse.com/