• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

OK guys what do you think?

  • Thread starter Thread starter SMOKEDYA
  • Start date Start date Sep 9, 2008

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Sep 9, 2008
#1
  • Sep 9, 2008
  • #1
Complete EFI 351 w Intake buying this for a my 351w for my coupe. didnt want to go this route but then i want it in and running and cash is alittle low at the moment. So with that intake and a set of GT40P ported polished heads the block is 40 over other then that all stock, i will have ford racing 24# injectors as well as a 76MM MAF and 70MM T.B. L/T headers. Do you guys think i'll be over 300 H.P and 338TQ at the wheels or more?I dont know but hopeing also that my cobra upper will bolt to that lower? peace


john
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Sep 9, 2008
#2
  • Sep 9, 2008
  • #2
That doesn't look like a gt40 lower intake....
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Sep 9, 2008
#3
  • Sep 9, 2008
  • #3
Those pictures are pretty bad... Are you sure its a GT-40 lower casting? I can't say I'm familiar with that intake.

BTW, you'll be choking a 351with those parts, especially the upper with the 70mm TB. If you manage to get a hold of a 351W GT-40 lower, I'd port the hell out of it, as well as the upper, and go to a 75mm TB (at least).
 

Kman92

Active Member
Nov 4, 2007
27
8
39
Jax,FLorida
Sep 9, 2008
#4
  • Sep 9, 2008
  • #4
Looks like a Truck intake.
 

Coast2CoaStang

Member
Aug 11, 2008
254
4
19
Sep 9, 2008
#5
  • Sep 9, 2008
  • #5
Kman92 said:
Looks like a Truck intake.
Click to expand...


Yep. My brother acquired a 351 from I believe, an 89 or 90 F series truck, and it is identical.
 

68stang351

Founding Member
May 16, 2002
850
9
39
Savoy TX
Sep 9, 2008
#6
  • Sep 9, 2008
  • #6
I am familiar with that intake, and a GT40 upper WILL NOT bolt to it. Sorry, you're pretty much stuck with that upper if you want to use that lower intake.
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Sep 9, 2008
#7
  • Sep 9, 2008
  • #7
yes it is a truck intake. so the power levels at the wheels i want arent possible with the set up? peace



john
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Sep 10, 2008
#8
  • Sep 10, 2008
  • #8
I assume the goal for the new motor is to make more power than the old? If thats the case and 300/338 is the number to shoot for, I wouldnt waste the time and energy going GT40 heads and such. You wont see much more power if at all, and that seems like a lot of work for the same result.
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Sep 11, 2008
#9
  • Sep 11, 2008
  • #9
Well i was going to go with a set of 205 AFR's with trick flow R intake,but unless i won the lottery from last night i wont be able to afford the AFR's for a while i want to get the 351 in this winter so it's in and running. I have stock heads for the 351 but then i also have a set on my 5.0 of the GT40P's that have work done on them. I'm pulling the engine this winter again to do some recleanning and repainting so what the hell pull the engine and install a 351! All i need for the 351 to work (if i get this stuff) is a flywheel and balancer.peace


john
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Sep 11, 2008
#10
  • Sep 11, 2008
  • #10
SMOKEDYA said:
Well i was going to go with a set of 205 AFR's with trick flow R intake,but unless i won the lottery from last night i wont be able to afford the AFR's for a while i want to get the 351 in this winter so it's in and running. I have stock heads for the 351 but then i also have a set on my 5.0 of the GT40P's that have work done on them. I'm pulling the engine this winter again to do some recleanning and repainting so what the hell pull the engine and install a 351! All i need for the 351 to work (if i get this stuff) is a flywheel and balancer.peace


john
Click to expand...

If that is the case, I say screw that intake and look for a 351 GT-40 lower on ebay or something. That is all you would need for the swap and I bet you could find one.
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Sep 11, 2008
#11
  • Sep 11, 2008
  • #11
so a gt40 lower will bolt to my cobra upper? what years and what vehicale did they come on for a 351 just lighting's? peace


john
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Sep 11, 2008
#12
  • Sep 11, 2008
  • #12
Yes, it will bolt to your Cobra upper. Like I said before, a good idea would be to move to a 75mm TB and hog out the mouth of the upper, but maybe that is futile work if you are going to get a new intake eventually, anyway.

I believe there are three sources for 351 GT-40 lowers:

1. GT-40 boat motors built in the '90s. These are all but impossible to find, in my experience, unless you want to tear apart a perfectly good Hydrodyne or Nautique. I always drooled over boats equipped with those motors. Ford has since got out of the pleasure boat market.

2. FRPP aftermarket. They aren't selling them new anymore, but sometimes they show up on ebay.

3. Lightning F-150s. I bet a sly way to find one of these is by looking through the classifieds on one of the Lightning forums. These can also be found on ebay.
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Sep 11, 2008
#13
  • Sep 11, 2008
  • #13
NikwoaC said:
Yes, it will bolt to your Cobra upper. Like I said before, a good idea would be to move to a 75mm TB and hog out the mouth of the upper, but maybe that is futile work if you are going to get a new intake eventually, anyway.

I believe there are three sources for 351 GT-40 lowers:

1. GT-40 boat motors built in the '90s. These are all but impossible to find, in my experience, unless you want to tear apart a perfectly good Hydrodyne or Nautique. I always drooled over boats equipped with those motors. Ford has since got out of the pleasure boat market.

2. FRPP aftermarket. They aren't selling them new anymore, but sometimes they show up on ebay.

3. Lightning F-150s. I bet a sly way to find one of these is by looking through the classifieds on one of the Lightning forums. These can also be found on ebay.
Click to expand...

Ok cool i'll have to start looking on those forums and theres several boat dealers and junkyards here. peace




john
 
You must log in or register to reply here.

Similar threads

351w turbo build.... Turbo guys teach me things...
  • Kid wita 5oh
  • Oct 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 23, 2025
General karthief
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
HP woes with Sniper Sytem
  • Stang_1973
  • Mar 10, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 13, 2025
revhead347
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
Fox What do you guys think I should do with my quarter windows
  • AnthonyA1234
  • Sep 24, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 6, 2024
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?