ok quick ? about mass air???????

[superslothguy]

someone told me that if i get a 70mm mass air sensor with 24 lb injectors i would have to prom gram the computer diffrently and its very expensive is this true or would they work without anything like that

 

[Look Its Aaron]

No you don't have to program your computer. You can't just switch injectors on a car. Depending on which Mass Air Meter you go with you have to have a calibration tube or buy it calibrated for the 24lb injectors.

 

[bynummustang]

Like it says above, depending on the company, you have to buy the calibration for the correct size injectors. C&L has the cal. tube, $20, and PRO-M needs it sent to there place to do the wrok.

I feel great, i just answered a question, and got it right! if only it was like that in school.

 

[bubba-dough]

And I agree with these guys....for the free post.

 

[aleborjas]

do i need to change the stock maff to put 24's with cobra computer?

 

[TooFoxy]

as long as its a stock maf from a cobra, no

 

[BlownFiveLiter]

as long as its a stock maf from a cobra, no

I honestly don't recall for sure, but if the '93 Cobra was like the 94-95, the MAF is identical between the GT and Cobra, and the calibration was done in the EEC itself. A stock GT meter would work fine with the 24's if that is the case.

 

[aleborjas]

i have the stock GT meter (19's) but i whant to put 24's on a 92' manual with the cobra computer

 

[TenorPlayinGuy]

that would be fine just so long as the injectors are indeed 24#'s and the MAF is either a Aftermarket unit made for 24# injectors, or a stock COBRA MAF. The Computer from a 93 cobra is not usable with 19 lb injectors, It is programmed to work specifically with 24#'S straight from ford.