One pic of the new wheels on the car...

[JOEGTS]

Looks great! Those are the same wheels I want to put on my CS/GT. I know you have to buy some sort of band for the wheel sensors from Ford. Is there any trick to these or are they self-explanatory? I am a Master tech for Toyota and have been dealing with the Valve Stem type sensors for years but I have never even seen these type before.

 

[DarkFireGT]

The bands are a lot cheaper from American Muscle.

http://www.americanmuscle.com/universal-tpms-bands.html

 

[blacksheep06]

looks good

As others have touched on, now you need some black accents on the car like tint, a black spoiler (front and/or back), maybe one of those panels over the fake gas cap on the back of the car. A shaker hood would look good too with a black hood scoop.

Don't go overboard of course.

 

[stang8urimport]

Looks great! Those are the same wheels I want to put on my CS/GT. I know you have to buy some sort of band for the wheel sensors from Ford. Is there any trick to these or are they self-explanatory? I am a Master tech for Toyota and have been dealing with the Valve Stem type sensors for years but I have never even seen these type before.

It's real easy. Just cut the stock band.. pull off the sensor (it is attached with 3M tape)... The American Muscle band clamps come with new brackets, 3M tape, and worm type clamps. Install the new bracket on the sensor, run the clamp through the bracket.. put on the 3M tape on the braket, stick the sensor 180 degrees from the valve stem... and tighten the clamp... cut the excess off... These bands will probably work with 24 inch wheels, they are SO long. Pretty easy to do!

Nick

 

[JOEGTS]

Thanks for the info!