• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Only guys "with" 430 gears come in!

  • Thread starter Thread starter willys1
  • Start date Start date Oct 25, 2004

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Oct 25, 2004
#1
  • Oct 25, 2004
  • #1
I know there was just a big thread on "top speed" with these gears,,DONT CARE,,,what I wanna know is what rpm are you doing on the highway at 60,,,70,,,and 80mph?? Oh yeah,I have an aod,but if you have a 5spd with 430's,more power to you!!And how is your gas mileage?
 

PhLoBuS

New Member
Aug 15, 2004
473
0
0
Beverly, MA
Oct 25, 2004
#2
  • Oct 25, 2004
  • #2
probably around 2500 with a aod around 65
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Oct 25, 2004
#3
  • Oct 25, 2004
  • #3
PhLoBuS said:
probably around 2500 with a aod around 65
Click to expand...
I have 410's rite now,and at 2500rpm's Im at 70mph! Thats not bad!! Im waiting till I get my Thumpers and the Ft1 cam.Thats the good thing about the aod,its got a big "OD"!! Hows the acceleration?
 

axeman

Founding Member
Feb 9, 2001
1,348
0
36
Elizabethtown, PA
Oct 26, 2004
#4
  • Oct 26, 2004
  • #4
60 mph is ~2100 rpms. 70 mph i'm taching ~2450 rpms. 80 mph is ~2800 rpms. of course, right now i run 275-60-15's in the back, which are 28" tall. i'm thinking of changing to a slightly smaller tire sometime though because they do rub. it still wouldn't be too bad on the highway with a smaller tire, although i don't drive the car as much as i used to. i want to keep the car under 5000 miles per year because of emissions. 4.30 gear is definatly not for everyone though.
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Oct 26, 2004
#5
  • Oct 26, 2004
  • #5
axeman said:
60 mph is ~2100 rpms. 70 mph i'm taching ~2450 rpms. 80 mph is ~2800 rpms. of course, right now i run 275-60-15's in the back, which are 28" tall. i'm thinking of changing to a slightly smaller tire sometime though because they do rub. it still wouldn't be too bad on the highway with a smaller tire, although i don't drive the car as much as i used to. i want to keep the car under 5000 miles per year because of emissions. 4.30 gear is definatly not for everyone though.
Click to expand...
No there not for everyone,,,I like them because they keep me honst on the highway.I have 410's rite now,Ive noticed myself getting a little higher every month on the tach.Im on rt. 80 every morning at 430 in the morning (yes the rt 80 that runs coast to coast) I know the spots where the police are so for the rest of my hour long ride I find myself doing 3 grand.My speedo is off because of my 410's,but its between 85-95.Thats too fast,Im 37,I dont need a speeding ticket.But with 430's,things would be alot slower.But Im waiting till I get a new cam.
 

hllon4whls

BANNED
Founding Member
Jan 17, 2002
2,567
0
46
Covington
Oct 26, 2004
#6
  • Oct 26, 2004
  • #6
willys1 said:
No there not for everyone,,,I like them because they keep me honst on the highway.I have 410's rite now,Ive noticed myself getting a little higher every month on the tach.Im on rt. 80 every morning at 430 in the morning (yes the rt 80 that runs coast to coast) I know the spots where the police are so for the rest of my hour long ride I find myself doing 3 grand.My speedo is off because of my 410's,but its between 85-95.Thats too fast,Im 37,I dont need a speeding ticket.But with 430's,things would be alot slower.But Im waiting till I get a new cam.
Click to expand...

Sounds like you just need cruise control, not a set of gears.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Oct 26, 2004
#7
  • Oct 26, 2004
  • #7
willys - if you're thinking about changing from the 4.10's in your sig, a change to 4.30's is only a 5% change in engine speed. 3000 rpm now would only be 3150 rpm with the 4.30's. You can achieve the same thing a lot less expensively by running a slightly (5%) shorter rear tire.
 
N

NC85

Founding Member
Jun 30, 2000
100
0
0
Chesapeake, VA
Oct 26, 2004
#8
  • Oct 26, 2004
  • #8
I have yet to replace my speedo gear, but I cruise about 2400 on my 4am interstate ride to work and don't get hassled by the cops on the side of the road (55 Zone).


225-60-15
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Oct 27, 2004
#9
  • Oct 27, 2004
  • #9
axeman said:
60 mph is ~2100 rpms. 70 mph i'm taching ~2450 rpms. 80 mph is ~2800 rpms. of course, right now i run 275-60-15's in the back, which are 28" tall. i'm thinking of changing to a slightly smaller tire sometime though because they do rub. it still wouldn't be too bad on the highway with a smaller tire, although i don't drive the car as much as i used to. i want to keep the car under 5000 miles per year because of emissions. 4.30 gear is definatly not for everyone though.
Click to expand...

Hmm...my 373's tach at 2000 at 60mph...I think your tach is off...mine is accurate evne besides the tires being different and the final drive ratio is like .01 off between AOD's and T5's...so it isn't that I currently have a 5spd...
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Oct 27, 2004
#10
  • Oct 27, 2004
  • #10
5 spd - depends also on the 5th gear ratio in the T-5; some have .675, some have .625.
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Oct 27, 2004
#11
  • Oct 27, 2004
  • #11
Michael Yount said:
5 spd - depends also on the 5th gear ratio in the T-5; some have .675, some have .625.
Click to expand...

All 86-93 5.0 Mustang factory installed T5's have a .67 5th gear. Real early T5's I think had the .62 5th gear. Like in late '83 or '84 whenthe T5 switch occured.

All AOD's have a .68 4th gear.
The AODE-W/4R70W has a .70 4th gear.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Oct 27, 2004
#12
  • Oct 27, 2004
  • #12
tjm73 said:
All 86-93 5.0 Mustang factory installed T5's have a .67 5th gear. Real early T5's I think had the .62 5th gear. Like in late '83 or '84 whenthe T5 switch occured.

All AOD's have a .68 4th gear.
The AODE-W/4R70W has a .70 4th gear.
Click to expand...

I have a 95 t-5 (could be different) and I sit at 2000rpm...

Yeah that is what I was thinking about the year models...they were all the same for the newest model fox platform (87-93)...in which I was referring to...
 

bluevenom867

I will have images of molesting stuffed animals in
Dec 15, 2003
1,704
1
0
St.Petersburg,FL
Oct 27, 2004
#13
  • Oct 27, 2004
  • #13
I had 4:10 in my car with the C4 and 26" inch tire it would do 65-70mph at like 27-2800rpm.I got 3:73 now and it alittle better 24-2500rpm at 65-70mph.I will probabley never drive on the highway again as that was just to break in the new motor.
 

cleanLX

Founding Member
Jan 17, 2001
976
537
144
Oct 27, 2004
#14
  • Oct 27, 2004
  • #14
Well...
I don't have 4.30's, but gave them much consideration.
4.30's would have put me enough over my usefull power curve in the 1/4 for the speeds I'm targeting that I decided against them.
Matter of fact, it would have put me on the limiter thru the traps, and, I didn't want to go the twEECer route for $$$ reasons.
If you plan on trapping below 112-114 on a 26" tire, you'll want a combination that has shift point up handy to 6000.
You'll want to make sure your combo will breath there.
My combo is going to want to be shifted 5600-5800, so, I'll want a trap rpm of ~6000 and I'm hopeing that equates to ~112 aveerage thru the traps (60' timed speed calc.) All that equals 4.10's for me.

Anyways... just trying to point out there is lots to think about other than just freeway rpm.

As for gas mileage, the swap from 3.73 to 4.10 was a definate mpg killer. Add 200rpm to the equation I cannot imagine it getting better at that point. I was getting 26mpg with 3.73's, I'd be suprised (never calc'd it, but, as an estimate) if I got over 22 with 4.10's, and I'd guess 20mpg would be the target if I were to add a couple hundred rpm to the equation. Anyways, I'd "guess" a drop of 2mpg from 4.10's to 4.30's.

If you 1/8th rather then 1/4, you may want to look at 4.56's, or, even 4.88's.
Although, that'd certianly be more than 'I'd' want for a driver.

Good luck making your decision Willys.
I know I spent much time pondering it myself.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Oct 27, 2004
#15
  • Oct 27, 2004
  • #15
Anyone who has bought a new world class from Ford Racing also has a .625 fifth, and a 2.95 first instead of the 3.35. That's what's in mine.

Mike - I'm surprised at the gas mileage change on yours. I did a bunch of experiments with my wife's car/trip computer checking gas mileage at 60/65/70 mph in 4th gear vs. 5th gear. In her car that's like the difference between 3.55's and 4.10's in a Stang. It was about 5% difference at 60, 7% at 65 mph and 10% at 70 mph (dropped from 40mpg to 36). 'Course, her car's a bit more aerodynamic than the Stang, but it is interesting what a big hit you took with 4.10's.
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Oct 27, 2004
#16
  • Oct 27, 2004
  • #16
No Im getting the 430's for the acceleration!! Slowing me down on the parkway is just a bonus!!! Im keeping my 245 or 255/55/16' Nittos.They would be way to muchIMO(430's),,for the stock cam.I dont usually cruise at 3 grand,only on the way to work.Normally Im at 2500,,thats 72mph
 
You must log in or register to reply here.

Similar threads

S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
717
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Drivetrain Fox Power Loss While In Gear
  • J_5.0_VERT
  • Dec 17, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
1K
Fox 5.0 Mustang Tech Dec 31, 2024
J_5.0_VERT
X
VE Table Not Dialed? Send Me Your Datalog.
  • X-cam34
  • Feb 8, 2026
  • Digital Self-tuning Forum
  • 2 3
Replies
49
Views
1K
Digital Self-tuning Forum May 1, 2026
X-cam34
X
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
915
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
B
Questions About T5 Manual
  • Blackout67
  • Apr 13, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
10
Views
611
1996 - 2004 SN95 Mustang -General/Talk- Apr 22, 2025
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?