Fox Opinion On This K-member?

dnbonds · May 14, 2014

I found this used Performance Automotive Tubular K-Member with a decent amount of pictures. It's $100 and would like someone's opinion. It has a decent amount of pictures, the motor mount holes have been modified. If I get this I'll swap it out with the stock one when my engine is pulled.

http://westmd.craigslist.org/pts/4410523054.html

It's 60 miles away (about an hour) so I'm not sure if its worth it. Unless the seller would be willing to meet halfway.

Thanks!

flstang65 · May 14, 2014

Pass. I have never heard of that brand, it is beat the f up and, "holes have been modified where engine mounts go".

mikestang63 · May 14, 2014

Serious?

What's with your current stock K member.

dnbonds · May 14, 2014

I thought it would be a decent upgrade while the engine was out. I guess this one isn't worth anything Lol.

84Ttop · May 14, 2014

@Sharad this man needs a k member!
Look into the UPR products k member. Top quality at a reasonable price! Pass on the butchered piece you posted up. Looks sketchy

Noobz347 · May 14, 2014

mikestang63 said:
Serious?

What's with your current stock K member.

Seems Legit.

Grabbin' Asphalt · May 14, 2014

Being that's a pretty critical piece upfront, buy it NON-hacked...lmao!!!

dnbonds · May 14, 2014

Why would they need to cut out such big holes?

mikestang63 · May 15, 2014

dnbonds said:
Why would they need to cut out such big holes?

A. it didn't fit
b. see A

FoxMustangLvr · May 15, 2014

Wouldn't take it if it was dropped off at my door and FREE! Pass. I agree with @84Ttop , look up UPR

dnbonds · May 15, 2014

I did and UPR is way out of my budget. Stock will have to do, especially since its a daily driver and will not see a single track day. I just saw the deal and posted it and if it was good I would have jumped on it. I was skeptical of the modified motor mounts

Sharad · May 19, 2014

We make mild steel k-members which are more affordable than our Chromemoly k-members, but they still come with a Lifetime Guarantee. I'll give you a nice discount on a steel k-member to keep you from buying that atrocity.

dnbonds · May 19, 2014

I'll send you a pm @Sharad if I am under budget by the end of the week. Thanks!

bentley429isBAC · May 19, 2014

UPR is nice stuff, thats what in my car. Racecraft is really good quality stuff also.

revhead347 · May 19, 2014

I have a new D&D K-member that someone left here. The dude who left it here owes me a TA Performance 8.8 Axle girdle, so I'd let it go for that. Probably not worth the shipping cost though. It was purchased for an SN.

Kurt

old_blue · May 19, 2014

If it won't see track time at all and you aren't going to modify the car heavily I wouldn't waste the money on an aftermarket k-member. Just my .02 though.

mikestang63 · May 19, 2014

Yep. No reason at all to swap K members on a street car unless you need the room for a motor swap or header room. Spend your money elsewhere.

Fox Opinion On This K-member?

dnbonds

Active Member

flstang65

mikestang63

dnbonds

Active Member

84Ttop

They make new pistons every day, so why worry?

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Grabbin' Asphalt

dnbonds

Active Member

mikestang63

FoxMustangLvr

I love my Pimp

dnbonds

Active Member

Sharad

ALWAYS choose the V over the P!!! Wait... what?

dnbonds

Active Member

bentley429isBAC

revhead347

Apparently my ex-husband made that mistake.

old_blue

mikestang63

Similar threads

Fox Opinion On This K-member?

Active Member

Active Member

They make new pistons every day, so why worry?

Stangnet Facilities Maint Tech... Er... Janitor

Active Member

I love my Pimp

Active Member

ALWAYS choose the V over the P!!! Wait... what?

Active Member

Apparently my ex-husband made that mistake.

Similar threads

Privacy & Transparency

Privacy & Transparency