I recently blew a head gasket while at the track. I removed the heads, ported the exhaust chambers to match the headers better. I am also having a 3 angle valve job jone with some minor blending along with new higher rate springs. I know this was not the best option HP wise. I just don't have the $$ right now for the stuff I realy want. Therfore I am stuck with what I have. I am considering installing a new cam while I have the motor apart. The block is stock except for the work mentioned to the heads. What cam should I go with? I ocassionaly spray a 150 wet shot. I want something that would work well with that and still give good power off the juice. And what type of HP gain can I expect out of the mods?