Order of Mods, sound good???

[PSCBrenden]

My sig is what i currently have this is what i plan on getting in order. Let me know if you guys would change anything.


Starting wtih the sub 200.00 mods.
1. Under/Drive Pulleys
2. Mach 1 springs/Struts (not installing till i get shocks and C/C plates)
3. Eibach Pro-Kit
4. Steed C/C plates
5. Steeda front swaybar
6. Strut tower brace
7. Mac Catted H-Pipe
8. FlowMaster American Thunder Cat-back
9. Accufab Plenum
10. Accufab Throttle Body
11. Superchips Programmer (before gears so i dont have to get speed-cal)
12. FRPP 4.10s
13. ????

 

[krly79]

13. Kenne Bell

 

[Zinc03GT]

My sig is what i currently have this is what i plan on getting in order. Let me know if you guys would change anything.


Starting wtih the sub 200.00 mods.
1. Under/Drive Pulleys
2. Mach 1 springs/Struts (not installing till i get shocks and C/C plates)
3. Eibach Pro-Kit
4. Steed C/C plates
5. Steeda front swaybar
6. Strut tower brace
7. Mac Catted H-Pipe
8. FlowMaster American Thunder Cat-back
9. Accufab Plenum
10. Accufab Throttle Body
11. Superchips Programmer (before gears so i dont have to get speed-cal)
12. FRPP 4.10s
13. ????

Don't 2 & 3 kind of do the same thing? And I'd do a Pro-chamber over a catted H, unless emissions are a worry. I'd look into LTs as well. And krly79 answered 13 perfectly.

 

[PSCBrenden]

oops i meant mach 1 shocks and struts.

 

[duece1019]

get a sct tuner not super chips, strut tower brace is a waste of money unless you're a serious road racer.

 

[WhiteDevil69]

My sig is what i currently have this is what i plan on getting in order. Let me know if you guys would change anything.


Starting wtih the sub 200.00 mods.
1. Under/Drive Pulleys
2. Mach 1 springs/Struts (not installing till i get shocks and C/C plates)
3. Eibach Pro-Kit
4. Steed C/C plates
5. Steeda front swaybar
6. Strut tower brace
7. Mac Catted H-Pipe
8. FlowMaster American Thunder Cat-back
9. Accufab Plenum
10. Accufab Throttle Body
11. Superchips Programmer (before gears so i dont have to get speed-cal)
12. FRPP 4.10s
13. ????

I'd move the exhaust portion up a bit. Mine would go
7, 11/12, 1, 2, 3, nix the rest and save for a blower! if you want to stay N/A i'd start with UCA and LCA's before c/c and the plenum/throtlle body is really over rated, unless you dont like money..

 

[jbrown]

id move up the gears and programmer, or better yet a dyno tune(but with the programmer you can keep adding mods and adjust somewhat) if you get the handheld and not a custom tune on it you should move it up the list definately, the tb/plenum will give you like 5 or 6 hp, also get some control arms, maybe do them at the same time as the rest of the suspension mods, i dont know much about the strut tower brace or the sway bar

 

[wms004]

change teh swaybars with Maximum Motorsports lower control arms.