Fox output shaft seal

limp · Aug 24, 2022

mattys91gt said:
yes I do have oil dripping at the inspection plate

it's my first mustang I wanted one my whole life and all my time working in autobdy shops and automotive shops I never learned how to work on older cars I try not to ask on here because I sound stupid not knowing what part is what I always try to ask a friend or the internet I'll post more pictures then ask questions,all my friends gave up on mustangs years ago so I only have a few ppl to ask

Nobody on here will judge you unless you take some pot shots at them or you want to be a smart a$$.....We have all been there and MOST people on here are happy to help if they can..
Slow down and take a breath........
Slow down when you type your problem and give the best comment of what and where the problem is you can... Pictures are always great and easy to load on this site..... Always go back and reread your post, making sure the punctuation is correct... Nothing is worse than trying to make sense of the hurried post with NO punctuation and sentences and different problems running into each other.... There is an edit feature here so you can redo it at any time.....

Finally I find it best if you have different posts for different problems or questions.......

7991LXnSHO · Aug 24, 2022

+1 on pics and learning.

mattys91gt · Aug 24, 2022

limp said:
Nobody on here will judge you unless you take some pot shots at them or you want to be a smart a$$.....We have all been there and MOST people on here are happy to help if they can..
Slow down and take a breath........
Slow down when you type your problem and give the best comment of what and where the problem is you can... Pictures are always great and easy to load on this site..... Always go back and reread your post, making sure the punctuation is correct... Nothing is worse than trying to make sense of the hurried post with NO punctuation and sentences and different problems running into each other.... There is an edit feature here so you can redo it at any time.....

Finally I find it best if you have different posts for different problems or questions.......

Ya I always forget to use a coma or period. I fixed the settings,now with the car I see parts going skyhigh and the car sitting for so long I think it's out of my car knowledge to fix,I still can't get this seal in,I even put the old seal in a exhaust pipe to hit it in but I have no swing room

Potomus Pete · Aug 24, 2022

You can fix just about everything on your car with the help of Stangnet.Com. Just get a good selection of tools.

90sickfox · Aug 24, 2022

I don't judge people...except people trying to fix their own first mustangs. Those people are what keeps this forum going.

We've all been confused about what we were talking about or asking questions for. A bunch of things on cars have 3 or 4 different names...and 100 different nicknames. Then the car companies decided to switch right and left from looking at the car from the front to sitting in the driver's seat. Front is rear....and rear is front...its like a chick I met in the trailer park years ago. She wobbles so much ya never knew what direction she's going in.

mattys91gt · Aug 24, 2022

Potomus Pete said:
You can fix just about everything on your car with the help of Stangnet.Com. Just get a good selection of tools.

I just have no room on the ground with Jack sta

90sickfox said:
I don't judge people...except people trying to fix their own first mustangs. Those people are what keeps this forum going.

We've all been confused about what we were talking about or asking questions for. A bunch of things on cars have 3 or 4 different names...and 100 different nicknames. Then the car companies decided to switch right and left from looking at the car from the front to sitting in the driver's seat. Front is rear....and rear is front...its like a chick I met in the trailer park years ago. She wobbles so much ya never knew what direction she's going in.

Ya the front and back get me confused. I have the Haynes book but it doesn't help like a video or someone there with you watching. I have to do axles and seals and no clue how to do that I'd love to keep it but it's going take time and money. Now with the seal what kind I use for lube just tranny fluid or gasket maker?

General karthief · Aug 24, 2022

Now you've lost me. Post a pic of where your trying to install the seal.
Stick with us, once we get an idea of what/where your working we can help better.

mattys91gt · Aug 24, 2022

90sickfox said:
I don't judge people...except people trying to fix their own first mustangs. Those people are what keeps this forum going.

We've all been confused about what we were talking about or asking questions for. A bunch of things on cars have 3 or 4 different names...and 100 different nicknames. Then the car companies decided to switch right and left from looking at the car from the front to sitting in the driver's seat. Front is rear....and rear is front...its like a chick I met in the trailer park years ago. She wobbles so much ya never knew what direction she's going in.

This is the seal I got

General karthief said:
Now you've lost me. Post a pic of where your trying to install the seal.
Stick with us, once we get an idea of what/where your working we can help better.

That's the seal I have right now

General karthief · Aug 24, 2022

Transmission out put shaft, aka tail shaft.
the one in post #9 will work.

mattys91gt · Aug 24, 2022

mattys91gt said:
This is the seal I got

That's the seal I have right

General karthief said:
Transmission out put shaft, aka tail shaft.
the one in post #9 will work.

I was able to put the old seal in a exhaust pipe but I still can't get it to go in I have another coming from Amazon tomorrow and I'll have to see what post u said will work

mattys91gt · Aug 24, 2022

General karthief said:
Transmission out put shaft, aka tail shaft.
the one in post #9 will work.

I found it and that will be here tomorrow thank you,so what is that seal for because that's what I pulled out

General karthief · Aug 24, 2022

I don't know without having it in my hand, most have a part number on them.

mattys91gt · Aug 24, 2022

General karthief said:
I don't know without having it in my hand, most have a part number on them.

I have the box's here's 2 and they both looks the same

General karthief · Aug 24, 2022

Both of those should work

mattys91gt · Aug 24, 2022

General karthief said:
Both of those should work

I don't have the swing room to hit them on and no one here wants to help I mean at my house lol

General karthief · Aug 24, 2022

It's not like driving a nail, just tap it around the metal flange,

mattys91gt · Aug 24, 2022

General karthief said:
It's not like driving a nail, just tap it around the metal flange,

I've been trying with all different tools I keep asking my wife to come hold the pipe and nshe never comes to help.Every time I hit it flush then start tapping a side of the seal comes out,even if I'm pushing on one side and tapping the other side it never wants to go in

General karthief · Aug 24, 2022

Tap top, bottom, side to side, light taps to get it started, takes some patients. Don't need a pipe, they make an installation tool but I've never used one.

mattys91gt · Aug 24, 2022

General karthief said:
Tap top, bottom, side to side, light taps to get it started, takes some patients. Don't need a pipe, they make an installation tool but I've never used one.

What type of hammer do you use just a regular hammer or rubber mallet

90sickfox · Aug 24, 2022

If you have wood...like two 2 by 4s you may be able to put them beside the shaft on each side screw one across the top and tap it. Kinda make a " H " pattern. Leave enough room to seat the seal without the bar or wood hitting the end of the shaft. You nay have to think outside the box.

Those seals cam be one of the most frustrating things to do.

Fox output shaft seal

wrap a little cheese around it and its a done

wanna catch the space herp

Active Member

I'm still waiting for the fully nude shots

Wasn't a pretty sight...and I've got big hands

Active Member

wonder how much it would cost to ship you a pair

Active Member

Attachments

wonder how much it would cost to ship you a pair

Active Member

Active Member

wonder how much it would cost to ship you a pair

Active Member

Attachments

wonder how much it would cost to ship you a pair

Active Member

wonder how much it would cost to ship you a pair

Active Member

wonder how much it would cost to ship you a pair

Active Member

Wasn't a pretty sight...and I've got big hands

Similar threads

Privacy & Transparency

Privacy & Transparency