Part 2 of my build

SMOKEDYA · Sep 21, 2010

Mine will work i beleive?The trick will be getting the correct spacing from the spacers,but i think i have that figured out also?Once my injectors come and i get a tune i'll be able to start it and tell ya better.peace

john

SMOKEDYA · Sep 22, 2010

Got the DP in lastnight and the pipe off the IC,going to remove the nose tonight to reroute the wireing get the alt hooked up,then get ready to hook up and wire in my wideband.My injectors probably wont be here till monday so i'll be at a stop till they come in.My plans for the weekend is to go to my buddies and weld the flange on the IC pipe and use his MAF electronics that are calibrated for 60#'s already,since my LMAF sencer wouldnt fit in my flange i bought.So since his MAF electronics are calibrated for 60# already,caint i just install it and set the timming and fuel pressure and be good,as long as i keep an eye on the A/F?peace

john

Rick 91GT · Sep 23, 2010

Cobra912 said:
That's what they have it set-up for is a reverse pump. So I'm sure it works.....at least I hope so. I was thinking of the Moroso kit but it mounts too low and I'd have to use a standard pump AND a grooved pulley. I think I'll do exactly like John has if it works for him.

I ran a 350HP NA set-up in the past with a little more belt wrap then you have pictured and had issues, I ended up switching it around to get more wrap, also used a 93 Cobra water pump pulley and it made it better.

Cobra912 · Sep 23, 2010

ahh good idea

SMOKEDYA · Sep 24, 2010

Rick 91GT said:
I ran a 350HP NA set-up in the past with a little more belt wrap then you have pictured and had issues, I ended up switching it around to get more wrap, also used a 93 Cobra water pump pulley and it made it better.

Whats so special about the cobra pully?peace

john

Cobra912 · Sep 24, 2010

I think it's larger diameter?

NIKwoaC · Sep 24, 2010

Yea, you're going to have belt slip with that little of contact.

Cobra912 · Oct 9, 2010

well you're not off the hook, any updates? I wanna know how you alternator bracket worked out.

SMOKEDYA · Oct 10, 2010

LOL i still havent tried it yet?Still sitting in the garage.Now i'm in no big hurry to get it donesince winyer/the rain looks to have returned peace

john

beyondspexj · Oct 23, 2010

still torn apart?

92GreenGT · Oct 23, 2010

Cobra912 said:
I think it's larger diameter?

Smaller

SMOKEDYA · Oct 24, 2010

Yep the rain is back here so i guess whenever it gets done it does.

john

281pony · Oct 24, 2010

SMOKEDYA said:
Yep the rain is back here so i guess whenever it gets done it does.

john

f that attitude. get that chit done.

we can have a heads up drag race in the snow. sc'd notch vs. turbo hatch.

SMOKEDYA · Oct 24, 2010

281pony said:
f that attitude. get that chit done.

we can have a heads up drag race in the snow. sc'd notch vs. turbo hatch.

all in time!How did your install go so far? peace

john

281pony · Oct 24, 2010

SMOKEDYA said:
all in time!How did your install go so far? peace

john

haha, nothing so far.

i've got studded snow tires and a torque arm setup. pretty sure your gonna get destroyed

SMOKEDYA · Oct 24, 2010

Oh yeah?Well i got a hemi and AWD!Top that! Well back to the point,GF said go out to the garage!So well i did and heres what i did

all i need now is to weld the new flange on for my new MAFsener and filter and oil and hook up the wideband!Then onto the exhust system.

john

SMOKEDYA · Nov 15, 2010

Well it isnt much of a video,but it's what it is for now.Got it started tonight for a few.Still no test drive need to finish the wide band and get the PCV system and exhust still.So far the alt bracket swap works cobra! peace

john

SteedaGT9150 · Nov 16, 2010

vid doesnt work.

beyondspexj · Nov 20, 2010

vid is only popping up with a still image

SMOKEDYA · Nov 20, 2010

Ok this link works,sorry ****ty quality cell phone camera.Couldnt really rev it because of the neighbors plus i have an exhust leak to find also.Once i get the wideband wired up and fix the exhust leak i'll have better vids! peace
http://s68.photobucket.com/albums/i28/SMOKEDYA/?action=view&current=startup.mp4

john

Part 2 of my build

SMOKEDYA

SMOKEDYA

Rick 91GT

Mustang Master

Cobra912

Active Member

SMOKEDYA

Cobra912

Active Member

NIKwoaC

中國製造

Cobra912

Active Member

SMOKEDYA

beyondspexj

Member

92GreenGT

PEAT

SMOKEDYA

281pony

Active Member

SMOKEDYA

281pony

Active Member

SMOKEDYA

SMOKEDYA

SteedaGT9150

Advanced Member

beyondspexj

Member

SMOKEDYA

Similar threads

Part 2 of my build

Mustang Master

Active Member

Active Member

中國製造

Active Member

Member

PEAT

Active Member

Active Member

Advanced Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency