Parts needed for brake conversion.

[01TrueBlueCobra]

I recently changed my front and rear rotors and calipers on my 01 Cobra to slotted rotors and 10th anniv. cobra calipers. Now I have a set of cobra calipersand rotors lying around. A friend of mine has a 89 LX 5.0 and he wants to know what other parts are needed to put these Cobra rotors and calipers on his fox.

 

[golfnutjetsfan]

brake conversion

Hi, I'm not as internet savvy as I like to think But I keep trying . I tried to PM you with some info on the conversion you're taking about, if you didnt get it please let me know

frank

 

[mustangjoe87]

94+ spindles and hubs
cobra brake lines and banjo bolts
94+ rear brakes
94-98 axle shats or drivers side ranger axle shafts
94-95 mustang master cylinder and brake booster
frpp proportioning valve plug
knob style proportioning valve

 

[trbkrb]

Basically what mustangjoe87 listed but depending on what he wants in the rear will dictate the axles and brackets he will need. For stock Fox width rear, (for 9" wide wheels) the Ranger axles and www.northracecars.com Cobra brackets, or for the wider 94-98 Mustang rears, the 94-98 axles and the stock Cobra axle flange brackets. He will also likely need the caliper brackets unless your kit came with them. And all the misc bolts, ebrake cables, MC conversion and parts.

Look at Matt Bobbitt's website for the complete parts list of the parts needed. http://svo73mm.cjb.net

Good luck!