Pedistal Mount Roller rocker saddle cracked?

Flavadave4

Active Member

Nov 28, 2003

1,044

21

49

Utica, NY

May 21, 2007

#1

• May 21, 2007

• #1

So I notice that I have a crack in one of the saddles that goes under the rocker arm, I take them all off and notice 2 of them are cracked. Can I get new saddles somewhere or am i stuck getting a whole new set of roller rockers?
BTW these are 1.6 Ford SVO pedistal mount.

Thanks for any help you can give!

 

BlownFiveLiter

have car, will race....wait, it doesn't run

15 Year Member

Nov 29, 1999

3,133

18

108

Chicagoland

May 21, 2007

#2

• May 21, 2007

• #2

You'll probably end up having to replace the damaged rockers, but I'm not 100% sure you can't get parts for them. I think Crane makes FRPP's rockers, so you could just order some individual replacement rocker arms from Summitracing or something if worst comes to worst.

 

Flavadave4

Active Member

Nov 28, 2003

1,044

21

49

Utica, NY

May 21, 2007

#3

• May 21, 2007

• #3

StangGT1995 said:

You'll probably end up having to replace the damaged rockers, but I'm not 100% sure you can't get parts for them. I think Crane makes FRPP's rockers, so you could just order some individual replacement rocker arms from Summitracing or something if worst comes to worst.

Click to expand...

The arms themself are fine, just the little part they sit down on. I noticed Summit sells the rockers in sets of 2 for $58......Maybe the route i will have to go in the morning!

 

ttop88

Member

Mar 12, 2007

42

0

6

indiana

May 22, 2007

#4

• May 22, 2007

• #4

Summit sells just the base. I had to replace mine a couple years ago. they are here:
http://store.summitracing.com/partdetail.asp?part=CRN-36758PS-16&autoview=sku

 

Flavadave4

Active Member

Nov 28, 2003

1,044

21

49

Utica, NY

May 22, 2007

#5

• May 22, 2007

• #5

Thanks again ttop88

 

tmoss

Gettin Wired

Founding Member

Jun 28, 2001

7,153

32

128

Saint Louis, MO

May 22, 2007

#6

• May 22, 2007

• #6

good catch - failed valve trains can get expensive.........

 

Flavadave4

Active Member

Nov 28, 2003

1,044

21

49

Utica, NY

May 22, 2007

#7

• May 22, 2007

• #7

tmoss said:

good catch - failed valve trains can get expensive.........

Click to expand...

All i could picture is one breaking and jamming a valve spring and pieces and parts rattling around in my valve cover!

Tmoss- getting her ready to go to the dyno, electric fan, 70mm Pro-m maf, 65mm TB and EGR. Going to try and get the most out of this Tmoss intake with Thumper heads and TFS1. Wish me luck!

 

tmoss

Gettin Wired

Founding Member

Jun 28, 2001

7,153

32

128

Saint Louis, MO

May 22, 2007

#8

• May 22, 2007

• #8

Best of luck to you............get the A/F graphed too if it is an option.

 

Flavadave4

Active Member

Nov 28, 2003

1,044

21

49

Utica, NY

May 22, 2007

#9

• May 22, 2007

• #9

will do