PI Intake on NON-PI heads (what parts r needed?)

Back2Mustangs

New Member
Sep 2, 2004
466
0
0
I realize this post is as redundant as every "What oil/tires/CAI/mufflers for my car" thread, but I don't have time to search.

I'm literally weeks away from replacing the motor in my 96 GT and the new motor will have PI heads. The intake on the 96 motor just cracked and I'm going to go ahead and throw a PI intake on it so it'll carry over to the new motor. I need to know what parts I'll need to fit the PI intake onto the Non-PI motor so I can get this done. This is not a good time for this to happen for me right now. Please help - I'm stressing.
 
  • Sponsors(?)


TGJ

New Member
Mar 30, 2005
1,049
4
0
I realize this post is as redundant as every "What oil/tires/CAI/mufflers for my car" thread, but I don't have time to search.

I'm literally weeks away from replacing the motor in my 96 GT and the new motor will have PI heads. The intake on the 96 motor just cracked and I'm going to go ahead and throw a PI intake on it so it'll carry over to the new motor. I need to know what parts I'll need to fit the PI intake onto the Non-PI motor so I can get this done. This is not a good time for this to happen for me right now. Please help - I'm stressing.
The absolute minimum of parts required:

- PI Intake with aluminum crossover drilled and tapped for the extra sensor
- Coolant tube that runs in the valley for a PI car
- 0-Ring water nipple for the water pump
- RTV and some 3/4" heater hose

Possible parts required:

PI Intake Gaskets
Alternator Bracket
 

Back2Mustangs

New Member
Sep 2, 2004
466
0
0
The absolute minimum of parts required:

- PI Intake with aluminum crossover drilled and tapped for the extra sensor
- Coolant tube that runs in the valley for a PI car
- 0-Ring water nipple for the water pump
- RTV and some 3/4" heater hose

Possible parts required:

PI Intake Gaskets
Alternator Bracket
That's mostly what I had suspected. Thanks, TGJ. My forged teksid, PI longblock is almost ready for install with MPH's blower cams. After it's in the car, I'll place my order for the Kenne Bell. This has taken much more time than I had anticipated, but I'm almost there!
 
Thread starter Similar threads Forum Replies Date
jenrik Pi intake on non pi heads SN95 4.6L Mustang Tech 18
F non pi head/pi cam and pi intake hp gains SN95 4.6L Mustang Tech 28
G Finally, a PI Intake to a Non-PI Heads Adaptor Kit! SN95 4.6L Mustang Tech 9
A Engine egr or non egr gt40 intake Fox 5.0 Mustang Tech 1
5spd GT Does anyone still cover the cracked non-pi intakes? SN95 4.6L Mustang Tech 7
Busted07 Questions about timing cover, water pump and non-efi intake install Fox 5.0 Mustang Tech 12
GT_Rich Need non-pi intake w/ alum cross over! SN95 4.6L Mustang Tech 17
B Non-PI Intake part number SN95 4.6L Mustang Tech 4
MrKwik HO vs. non-HO intake , how to tell? Fox 5.0 Mustang Tech 10
9 pi intake swap on non pi SN95 4.6L Mustang Tech 5
moneypit94 Here is a non-traditional intake? How/Why? 1994 - 1995 Specific Tech 11
2 Intake change on non mass air car ?? Fox 5.0 Mustang Tech 6
H Will 75mm elbow work with a non-ported Performet intake? 1994 - 1995 Specific Tech 12
J 2006 Mustang V6 backfire or popping in intake. Any ideas how to find the issue? I don't see any vacuum leaks, all plug wires are on tight. 2005 - 2014 S-197 Mustang -General/Talk- 2
Habu135 Expired 3" ID Cold Air Intake w/K&N Engine and Power Adder 0
M Intake replace help 1996 - 2004 SN95 Mustang -General/Talk- 2
2007_Crown_Vic Engine Explorer Intake Fox 5.0 Mustang Tech 2
Mustang5L5 Engine Explorer intake vacuum line diagram Fox 5.0 Mustang Tech 4
F Engine Getting my GT40 Intake ported, to Keep EGR or Not? Fox 5.0 Mustang Tech 26
D Engine Oil in Intake, normal? 1994 - 1995 Specific Tech 15
foxbodybill89 Engine convertible/explorer intake hood clearance Fox 5.0 Mustang Tech 2
W Mach1 2003 coolant leaking rear of engine SN95 4.6L Mustang Tech 2
gearhead77 Engine Valve cover/ intake studs and other stuff Fox 5.0 Mustang Tech 15
markinms Engine Explorer Intake Swap Performance Issues - Need Help! Fox 5.0 Mustang Tech 10
65ShelbyClone SOLD WTB Weiand Stealth 302 or Summit Stage 2 intake manifold Engine and Power Adder 0
R Engine setting valve lash on stud mounted roller rockers with intake already installed. 1994 - 1995 Specific Tech 4
5 Intake manifold/ general mod advice 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
T 4 brrl intake/carb combo for stock 1966 fastback 289 1965 - 1973 Classic Mustangs -General/Talk- 2
J Engine Trickflow Intake Street Burner Spacer Needed? Fox 5.0 Mustang Tech 13
T 2016 Mustang GT *Random Misfire's CEL* Charge Motion Valve "Flaps" in Intake Manifold 2015+ (S550) Mustang -General/Talk 5
R Engine Smoke test for possible leaking lower intake gasket Fox 5.0 Mustang Tech 0
91GTstroked Engine Changing lower intake gaskets Fox 5.0 Mustang Tech 15
K Best way to clean 4.6L DOHC upper and lower intake manifolds? 1996 - 2004 SN95 Mustang -General/Talk- 3
91GTstroked Engine Lower intake vacuum leak Fox 5.0 Mustang Tech 7
R Engine My on going lower intake dilemma w/pics Fox 5.0 Mustang Tech 14
92j3ieje8 How long to wait before removing intake manifold? 1996 - 2004 SN95 Mustang -General/Talk- 2
D F-150 4.2 Intake Manifold on V6 Mustang? SN95 V6 Mustang Tech 1
BETTERBULLITT Intake plastic nipple broke, antifreeze spewing everywhere. Now what? 1996 - 2004 SN95 Mustang -General/Talk- 5
Ultra90GT For Sale 351w GT40 tubular intake + extras Engine and Power Adder 0
P Looking to get a Intake plate 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
S 2000 3.8l lower intake 1996 - 2004 SN95 Mustang -General/Talk- 0
R Engine Upper intake & Components - Carbon buildup? Fox 5.0 Mustang Tech 4
02 281 GT LMR is making an ‘89-‘93 stock intake tube repro 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 13
B Engine Questions regarding a 93 Cobra Vacuum Leak/Intake Manifold Fox 5.0 Mustang Tech 6
D intake manifold bolts 2006 base The Welcome Wagon 0
65Stang86 WTB/Trade Looking for used edelbrock 7121 performer rpm intake manifold Engine and Power Adder 0
T What are these in the 3.8l Intake SN95 V6 Mustang Tech 4
S New Guy 2003 GT looking for intake manifold upgrade recommendations SN95 4.6L Mustang Tech 1
R Engine Ford Explorer GT40 intake and heads Fox 5.0 Mustang Tech 11
A Installing BBK SSI INTAKE 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
Similar threads