Well me and aond of the camaro guys went up to the shop today to take a look at the car. Yep same amount of work as was done 2 weeks ago. Ran into one of the members on stlsr.com was cool though. But snapped off a few pics. Tommy kept trying to tell me my wheels wouldnt fit at all...
The wheels did fit onto the lugs but I got to drill out the 4x100 area of the wheel so it can fit over the bolts used to hold the rotor on. But other than that fit and looked good. Still not much progress but since a few people were curious about it. Figured I would post it up.
The intercooler is going to get a Co2 spray bar on it. Also I am going to try tp strip this thing down to 1600lbs!
250-270hp 1600-1800lbs. she is at 1800 roughly right now. I am betting I can find another 100-200lbs lol.
which would put her with me in it and fuel around 1800-1900lbs.
No power steering
No sound deadening
No Ac
No power windows
No power locks
No power mirrors
Manual 5 spd (cable setup not hydraulic)
Wheels are around 8lbs lighter than stockers.
Got plenty of stuff to pull still though!
The wheels did fit onto the lugs but I got to drill out the 4x100 area of the wheel so it can fit over the bolts used to hold the rotor on. But other than that fit and looked good. Still not much progress but since a few people were curious about it. Figured I would post it up.
The intercooler is going to get a Co2 spray bar on it. Also I am going to try tp strip this thing down to 1600lbs!
250-270hp 1600-1800lbs. she is at 1800 roughly right now. I am betting I can find another 100-200lbs lol.
which would put her with me in it and fuel around 1800-1900lbs.
No power steering
No sound deadening
No Ac
No power windows
No power locks
No power mirrors
Manual 5 spd (cable setup not hydraulic)
Wheels are around 8lbs lighter than stockers.
Got plenty of stuff to pull still though!