Pics Of Your Fox With Rims

EPIK · Mar 14, 2009

Here's my 91 notch with 17X9 & 17X10 OE wheels 10th anniversary rep's... tires are 255/40/17 BFG KDW2's & 275/40/17 KDW's...

Javaking · Mar 14, 2009

Pur Pony said:
I`m down in Norwalk Marc......but I am sure we will bump into each other this summer. Will you be going to the EFI dyno day?

Yes, I will be at dyno day! Just pulled my clutch out this morning. Last time i was on chris's dynopaks the clutch was smoking at 650rwtq. Hopefully i can fix this problem. You said you have a SPEC 3+ right? You like it? how is it at low speed driving, in a parking lot, pulling into the garage? loading on a trailer? any chatter?[/QUOTE]

My Spec 3 really does not like low speed driving,it has chatter but it holds down the tq for now. If you like you can take it for a spin. Chris still has to work out some bugs in the tune then I will be ready for my race gas tune. I will see you there.

JadeGT · Mar 21, 2009

My contribution.

My suspension mods. Bold is the stuff I would change or ####ed up.

Front:

-94-04 13" cobra disc brakes
-94/95 spindles
-Stock control arms w/poly bushings and 94/95 napa brand ball joints I would like to have a control arm that the wheel doesn't rub.
-MM C/C plates
-MM solid steering shaft
-Billstein HD struts
-H&R sport lowering springs
-17"X9" FRPP 03/04 machined Cobras I am not crazy about a 17" x 9" with a stock control arm.
-245/45/17 Firestone wide oval tires This was the wrong tire width for a 17" width. It looks stupid. An 8" rim would work so much better with the stock control arm.
-Poly Sway bars bushings/end links
You can see I am not happy the front wheel and tire combo and the stock control arms. I have 2 rack limiters per side and the wheel still rubs the control arm.

Rear
-MM ED LCA’s
-FRPP UCA’s with new axle side bushings
-Sway bars bushings/end links
-94-04 11.65" cobra disc brakes
-Billstein HD shocks
-H&R sport lowering springs
-275/40/17 Firestone wide oval tires
-17"X9" FRPP 03/04 machined Cobras

The rear tire would not fit even with the quads flipped. I hope I don't have wheel hop.

LilBlueNotch · Mar 21, 2009

so far i havent seen many coupes with convo pros.

LilBlueNotch · Mar 21, 2009

JadeGT said:
My contribution.

My suspension mods. Bold is the stuff I would change or ####ed up.

Front:

-94-04 13" cobra disc brakes
-94/95 spindles
-Stock control arms w/poly bushings and 94/95 napa brand ball joints I would like to have a control arm that the wheel doesn't rub.
-MM C/C plates
-MM solid steering shaft
-Billstein HD struts
-H&R sport lowering springs
-17"X9" FRPP 03/04 machined Cobras I am not crazy about a 17" x 9" with a stock control arm.
-245/45/17 Firestone wide oval tires This was the wrong tire width for a 17" width. It looks stupid. An 8" rim would work so much better with the stock control arm.
-Poly Sway bars bushings/end links
You can see I am not happy the front wheel and tire combo and the stock control arms. I have 2 rack limiters per side and the wheel still rubs the control arm.

Rear
-MM ED LCA’s
-FRPP UCA’s with new axle side bushings
-Sway bars bushings/end links
-94-04 11.65" cobra disc brakes
-Billstein HD shocks
-H&R sport lowering springs
-275/40/17 Firestone wide oval tires
-17"X9" FRPP 03/04 machined Cobras

The rear tire would not fit even with the quads flipped. I hope I don't have wheel hop.

im not a very big fan of gts but dude, with the Cobras and that color

JadeGT · Mar 21, 2009

Thanks for the compliment now go back and get my pics out of your quote.!!

1991vert · Mar 21, 2009

when it moved under it's own power

capriman86 · Mar 22, 2009

I don't think i have replied to this wheel thread..lol there are quite a few.

17" TSW Kyalami wheels on 245/45/17 Bridgestone Pontenza 009's

cornfused · Oct 10, 2009

Anybody got any recent updates they can add?

I'm in need of ideas for this little beauty.

1993SSP · Oct 10, 2009

Here is mine with saleen replicas 9/10

331strokerlx · Oct 11, 2009

Mine are 15x8 Centerline sabres. As for tires they are 225/50/15 in the front and 225/60/15 in the back. The tire size isn't ideal but it will ok until spring so I can get some 255/60's for the back

93project · Oct 11, 2009

matador91 said:
18" bullits

just gotta say, i read the article at your car blows me away! Inspired me to do the 5 lug, even though I couldn't afford rear disc.....
anyway, beautiful car man-seriously!

RicochetRacer · Oct 11, 2009

JadeGT said:
My contribution.

My suspension mods. Bold is the stuff I would change or ####ed up.

Front:

-94-04 13" cobra disc brakes
-94/95 spindles
-Stock control arms w/poly bushings and 94/95 napa brand ball joints I would like to have a control arm that the wheel doesn't rub.
-MM C/C plates
-MM solid steering shaft
-Billstein HD struts
-H&R sport lowering springs
-17"X9" FRPP 03/04 machined Cobras I am not crazy about a 17" x 9" with a stock control arm.
-245/45/17 Firestone wide oval tires This was the wrong tire width for a 17" width. It looks stupid. An 8" rim would work so much better with the stock control arm.
-Poly Sway bars bushings/end links
You can see I am not happy the front wheel and tire combo and the stock control arms. I have 2 rack limiters per side and the wheel still rubs the control arm.

Rear
-MM ED LCA’s
-FRPP UCA’s with new axle side bushings
-Sway bars bushings/end links
-94-04 11.65" cobra disc brakes
-Billstein HD shocks
-H&R sport lowering springs
-275/40/17 Firestone wide oval tires
-17"X9" FRPP 03/04 machined Cobras

The rear tire would not fit even with the quads flipped. I hope I don't have wheel hop.

What would you change about the rear tire? Just a smaller width tire? The wheel size is fine right? Whats your offset?

I'm asking because I'm about to purchase a similar setup but my car isn't lowered any. It's bone stock

92GreenGT · Oct 11, 2009

Some beautiful cars in here, seeing these threads make me remember why I love the fox. Such a simple car, after I get my rear disc done and the AEM installed I'm going to work on getting mine looking the part. Amazing cars guys!!

Newest pic of mine(sorry about the blown out sky):

-Edit-
Also, the trim is off on the doors.

cenok is family · Oct 11, 2009

1993SSP said:
Here is mine with saleen replicas 9/10

OH...MY....GOD......

RARE NOTCH · Oct 11, 2009

Here my 15000 mile No Option Notch with Oem 10th anv Cobra's

izak · Oct 11, 2009

heres my contribution

By isaacconde, shot with COOLPIX L3 at 2009-10-04

izak · Oct 11, 2009

here's another, its a love, hate kinda rim.

By isaacconde, shot with COOLPIX L3 at 2009-10-04

Shaolin Crane · Oct 11, 2009

izak said:
heres my contribution

By isaacconde, shot with COOLPIX L3 at 2009-10-04

habiv · Oct 11, 2009

Pics Of Your Fox With Rims

EPIK

Member

Javaking

New Member

JadeGT

New Member

LilBlueNotch

New Member

LilBlueNotch

New Member

JadeGT

New Member

1991vert

capriman86

Member

cornfused

New Member

1993SSP

331strokerlx

Member

93project

Active Member

RicochetRacer

New Member

92GreenGT

PEAT

cenok is family

RARE NOTCH

Member

izak

New Member

izak

New Member

Shaolin Crane

Banned

habiv

Member

Similar threads

Pics Of Your Fox With Rims

Member

New Member

New Member

New Member

New Member

New Member

Member

New Member

Member

Active Member

New Member

PEAT

Member

New Member

New Member

Banned

Member

Similar threads

Privacy & Transparency

Privacy & Transparency