• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Pictures, thoughts & opinions on battery box install

  • Thread starter Thread starter TrickFlow
  • Start date Start date Jun 14, 2005

TrickFlow

Member
Jan 20, 2003
340
0
16
Bossier City, La
Jun 14, 2005
#1
  • Jun 14, 2005
  • #1
I got the summit battery relocation kit, and to my surprise, they accidentally ( i think) sent me the wrong plastic box. they sent me the huge one for marine batteries, not the normal small one. I can fit a 1000 amp battery in there with no problem...

Positive Cable:
Im buying a kill switch, and running one section of the positive cable to the kill switch, then from the other side of the switch to the solenoid. What im trying to figure out is how to run the positive battery cable to the solenoid. some people run it under the plastic then under the carpet and thru the firewall... others drop it under the car, and run the cable down the framerail. Where on the firewall should i go thru? Opinions please

Negative cable:
Im planning on running that one thru the floor in the hatch and finding a spot on the frame to bolt it to. Anything i should know?
 
T

Ted87GT

Founding Member
Sep 21, 2001
58
0
6
Southern Maine
Jun 14, 2005
#2
  • Jun 14, 2005
  • #2
well i think thats the box they send everyone. i bought one and got the same box. haven't installed it yet though so i cant help you with the other questions.
 

TrickFlow

Member
Jan 20, 2003
340
0
16
Bossier City, La
Jun 14, 2005
#3
  • Jun 14, 2005
  • #3
i dunno man, my uncle got the small box and my neighbor got the small one in his camaro. i went to his house last night and he looked up his receipt and it was the same part number, but different boxes. wierd. im just hoping i dont have fittment problems when closing the hatch. that thing is like 18 inches long.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Jun 14, 2005
#4
  • Jun 14, 2005
  • #4
Ya thats the same one I have in my 70 for now... I am gonna buy the alumium one or fab one when I redo the trunk area.
Kevin
 

9350coupe

New Member
May 11, 2005
109
0
0
chicago
Jun 14, 2005
#5
  • Jun 14, 2005
  • #5
i bought mine from steeda real nice aluminum. i ran my wire under carpet through firewall...works well
good luck
 

TrickFlow

Member
Jan 20, 2003
340
0
16
Bossier City, La
Jun 14, 2005
#6
  • Jun 14, 2005
  • #6
9350coupe said:
i bought mine from steeda real nice aluminum. i ran my wire under carpet through firewall...works well
good luck
Click to expand...


where on the firewall did you go thru.... was is an existing hole, did you drill one? im asking because my motor and tranny are out, so i dont know exactly where i should go thru... passenger side of firewall, or drivers side of firewall? top of firewall, or bottom of firewall?
 
B

BaXTeR3221

Member
Jan 12, 2004
917
0
16
Orange County, NY
Jun 14, 2005
#7
  • Jun 14, 2005
  • #7
I ran the power cable under the plastic on the side and throw the firewall grommet by the steering shaft. Kind of a pain, but it fit nicely. The only pain during the whole install was mounting the box and drilling holes around the frame. I did the fuel pump at the same time so the tank was already out.
 

TrickFlow

Member
Jan 20, 2003
340
0
16
Bossier City, La
Jun 14, 2005
#8
  • Jun 14, 2005
  • #8
BaXTeR3221 said:
I ran the power cable under the plastic on the side and throw the firewall grommet by the steering shaft. Kind of a pain, but it fit nicely. The only pain during the whole install was mounting the box and drilling holes around the frame. I did the fuel pump at the same time so the tank was already out.
Click to expand...


Lemme make sure i got this right... you ran the cable under the carpet on the passenger side, or drivers side? If you ran it under the carpet on the passenger side, did you cross it over by the firewall like behind the radio?
 

TrickFlow

Member
Jan 20, 2003
340
0
16
Bossier City, La
Jun 14, 2005
#9
  • Jun 14, 2005
  • #9
Paint Owns me... but this is the best i could come up with.... is this about right? red line signifies the positive battery cable
 
B

BaXTeR3221

Member
Jan 12, 2004
917
0
16
Orange County, NY
Jun 14, 2005
#10
  • Jun 14, 2005
  • #10
I went up the car on the drivers side. Ran the cable across the trunk, under the back seat and down under the plastic.
 

stang22

Active Member
Jan 29, 2003
1,318
7
38
Washington, D.C.
Jun 14, 2005
#11
  • Jun 14, 2005
  • #11
BaXTeR3221 said:
I went up the car on the drivers side. Ran the cable across the trunk, under the back seat and down under the plastic.
Click to expand...

Same here...
 
You must log in or register to reply here.

Similar threads

C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
239
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
R
Electrical Trunk Mount Battery and Cut Off Switch- Need Help
  • Rcdgl
  • Nov 20, 2024
  • Fox 5.0 Mustang Tech
Replies
1
Views
342
Fox 5.0 Mustang Tech Nov 20, 2024
nickyb
F
Alternator Not Charging
  • Fri Guy
  • Aug 29, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
435
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 31, 2025
AeroCoupe
89 LX Electrical Troubles
  • fun331
  • Oct 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
353
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 27, 2025
fun331
C
For Sale Remote mount battery turn on/off switch & 4 guage cables
  • Cobra Jet NJ
  • Mar 3, 2024
  • Interior Exterior Parts
Replies
0
Views
513
Interior Exterior Parts Mar 3, 2024
Cobra Jet NJ
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?