plastic quadrant

[Mustang_Punk]

Does anybody know what the part number is for the small plastic gear on the clutch quadrant? I desprately need this and PnP has no t-5 cars

or if you have this small quadrant gear with the spring I will pay just about anything for it

 

[HISSIN50]

Dare we ask why you're not going with aftermarket pieces?

Resto houses will be your best bet for NOS or reproduction parts if you have yourself set on those POS parts.

Good luck.

 

[cenok is family]

get an aluminum one man so you don't have to worry about whatever trouble you're going through right now ever again.

 

[Mustang_Punk]

the big part I have is aluminum, but it didn't come with the prawl gear

 

[bill302]

the big part I have is aluminum, but it didn't come with the prawl gear

you dont need it the quadrant you have has two holes which line up and are placed onto the shafts the old quadrant and prawl was removed from...

 

[Sicarius428]

The gear is uneeded with the aluminium quadrant. It's there on the stock unit to give some adjustability but you might as well get a firewall adjsuter which is much better and less prone to wearing out like the stock unit.
Kevin

 

[cenok is family]

you dont need it the quadrant you have has two holes which line up and are placed onto the shafts the old quadrant and prawl was removed from...

you don't need the pawl with any aluminum quadrant, regardless. i have the pro-5.0 quadrant which has only one hole. the other side rests against the second post that the pawl used to go on. SOOO much easier to install! and the firewall adjuster that comes with it is NICE. here's a pic.

 

[Mustang_Punk]

aww damnit! so i was sweating and swearing at the junkyard for no reason!

 

[HISSIN50]

It's no biggie - the end result is you don't need the POS. Imagine if you were still needing it................. and all the swearing when you tried to install it. Kinda sounds like something I'd do (I'm really big into mashing round pegs into square holes).

 

[Sicarius428]

I didn't even think about installing a stock one back in. Good lord... if you thought getting one out was a pain...
Kevin

 

[Mustang_Punk]

luckily the pedal assy. is out, good lord I can only imagine how impossible it would be to get that back in there!