Plenum and throttle body combo

I am within the next week to purchase my intake induction kit. My questions are relating to that. Is there a good link or does someone have good info to compare the numerous plenums out there now? Ive see the Accufab and also the C&L plenums but no data to compare those or others. Ive also seen a Accufab combo of plenum and 75MM T.B.. Any help with info in this area would be greatly appreciated. :shrug:
 
I would go with accufab and watch ebay. I ended up with a accufab/bbk setup for $300 that had been used for a couple dyno pulls.

I was just sold by the fact there was more power low in the band with the accufab and it had the best torque output. A brand new accufab combo setup was a bit $$$ though.
 
From what I have read all over the Internet, Dragon and Accufab are the best. If price is a issue and you don't care about 1 or 2 hp then get a C&L or Granatelli plenum. As for TB's, they are pretty much all the same. I have heard about quality issues with BBK and MAC. Accufab and Ford Racing make some good TB's.
 
ACCUFAB :hail2: I have the Plenum and 75mm TB. Love it. The looks alone make the thing worth the $$. They are more expensive but from what I read and the links on this and other boards made the process easy for me. I got mine from either coolblueperformance.com or rpmoutlet.com I think it was $350 for both. Look around you may find cheaper. Good luck
 
I just finished the install of my brothers BBK Plenum yesterday. He already had a 75mm BBK throttle body on his car, so we I just bolted it to it. I cleaned up the throttle body and the intake to get all the oil residue out and I polished up the inside of the plenum so it would flow better. The results were pretty nice. Good seat of the pants pull from low end all the way to redline. These aftermarket plenums do get the job done, especially if you polish them on the inside for better flow.
 
Nuff said!

AccufabTB.webp


TB&Plenum.webp
 

Attachments

  • AccufabTB.webp
    AccufabTB.webp
    129.3 KB · Views: 110
  • TB&Plenum.webp
    TB&Plenum.webp
    161.8 KB · Views: 120