Possible transmission problem? or somethin else?

Chin

New Member
Nov 29, 2004
39
0
0
Naperville
well it never really did this before.. occasionally like once a month itd not go into first but just a little wiggle and it would go in.. now this morning it has problems going into ALL gears and its even sticky pulling it out of a gear sometimes.. keep in mind this is a manual hah.. well anyways has anyone had this problem? if so what should i check out? what i noticed too kinda was that even though the clutch pedal was to the floor if i pressed it even harder it would finally go into gear a little better.. well just what ive noticed if anyone could help it would be greatly appreciated..
 
try engaging/disengaging the clutch a couple times before you try going into gear. Mine has done that before but I just pump the clutch a couple times in neutral and it works fine.
 
If your clutch is not burning or slipping then you have a stretched clutch cable most likely. Also try pulling you clutch pedal up as high as you can pull it so the self ajusting mechanism will reset at the top. If you get a new cable get a new quadrant and firewall ajuster if your budget allows. You can get all 3 parts in a kit on ebay for under $80.