• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Possibly a dumb question...

  • Thread starter Thread starter JuggalotuStang
  • Start date Start date Sep 28, 2005
J

JuggalotuStang

New Member
Jan 7, 2004
110
0
0
Southampton, MA
Sep 28, 2005
#1
  • Sep 28, 2005
  • #1
Is there another way to set the TPS sensor to whatever volts are needed?
 

RacEoHolic330

I like to dress like a pretty girl
15 Year Member
Mar 4, 2003
4,014
1,698
203
Allentown, PA
Sep 28, 2005
#2
  • Sep 28, 2005
  • #2
As opposed to what way? The only way to do it is to use a volt meter and measure the voltage on the wires going into the tps (+ on green, - on black). Then adjust the tps by unscrewing the 2 screws and rotating it until you get the desired voltage (~.98vdc)
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 28, 2005
#3
  • Sep 28, 2005
  • #3
You can use the inverse vector of the oscilliscope reading at 20000 megaohms when the idle is at exactly 672 RPM at humidity is at 5%.

Note: this only works if your name is Jim.

Seriously, it does not get much easier than the voltmeter method.

Good luck.
 

darthcual

Member
Mar 31, 2005
985
19
18
Arlington, TX
Sep 28, 2005
#4
  • Sep 28, 2005
  • #4
Another way? Buy a parts store replacement. Next.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 28, 2005
#5
  • Sep 28, 2005
  • #5
darthcual said:
Another way? Buy a parts store replacement. Next.
Click to expand...
I would still want to check the setting after installing a new one.
 

slow5poh

Senior Citizen
Jul 6, 2005
273
3
19
Citrus Heights, CA
Sep 28, 2005
#6
  • Sep 28, 2005
  • #6
WHAT A STUPID ****ING QUESTION YOU GOD DAMN IDIOT!! **** ME ****




just kidding.
 

darthcual

Member
Mar 31, 2005
985
19
18
Arlington, TX
Sep 28, 2005
#7
  • Sep 28, 2005
  • #7
HISSIN50 said:
I would still want to check the setting after installing a new one.
Click to expand...
Thats the same way not another way. Do you have aftermarket TB? If not and your having idle issues more than likely a tps could do the trick. If not take it back or leave it on its not that much dinero.
 
You must log in or register to reply here.

Similar threads

2003-04 Mustang Cobra Brake Conversion
  • Cassiebaebae
  • Oct 8, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
260
1996 - 2004 SN95 Mustang -General/Talk- Oct 24, 2026
Bib36`
W
Engine My engine dies after running 10 to 15 minutes under high heat.
  • Wylieone
  • Jun 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
296
Fox 5.0 Mustang Tech Jun 22, 2026
Mustang5L5
Engine Fuel not pumping
  • Creomod
  • Apr 13, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
51
Views
2K
Fox 5.0 Mustang Tech Jul 22, 2026
Noobz347
7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
846
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
Engine Keeping O2 sensors lit with long tube headers
  • keel
  • Jul 30, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
277
Fox 5.0 Mustang Tech Aug 21, 2026
Qtrhrse23
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?