• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Post pics of how your foxbody currently sits

  • Thread starter Thread starter Mustangfan
  • Start date Start date May 17, 2011
Prev
  • 1
  • …
  • 353
  • 354
  • 355
  • 356
  • 357
  • …
  • 378
Next
First Prev 355 of 378 Next Last

ThinBlue502

5 Year Member
May 7, 2019
408
727
113
Ohio
Sep 12, 2023
#7,081
  • Sep 12, 2023
  • #7,081


Today was an epic day.

The young lady behind the wheel, after she successfully learned to drive a car with a manual transmission, is the daughter of Capt. Ron, the previous owner of the car. I have no words for the emotions. We were both pretty moved by the experience.

Also, that’s 3 young people I have taught to drive a manual car in under a year! I don’t know why, but that makes me happy!
 
Reactions: Jersey Joe, mikestang63, Mustang5L5 and 6 others

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,161
21,335
234
Box behind Walmart
Sep 12, 2023
#7,082
  • Sep 12, 2023
  • #7,082
ThinBlue502 said:


Today was an epic day.

The young lady behind the wheel, after she successfully learned to drive a car with a manual transmission, is the daughter of Capt. Ron, the previous owner of the car. I have no words for the emotions. We were both pretty moved by the experience.

Also, that’s 3 young people I have taught to drive a manual car in under a year! I don’t know why, but that makes me happy!
Click to expand...

Does she have any idea what she's driving or does she think they all rolled off the assembly line that good? LoL
 
Reactions: ThinBlue502 and TOOLOW91

limp

wrap a little cheese around it and its a done
5 Year Member
Oct 4, 2020
5,472
2,903
173
Florida
Sep 13, 2023
#7,083
  • Sep 13, 2023
  • #7,083
At 39 I re entered the dating pool after a divorce...... I had a Merkur XR4Ti 5 speed beater car that alot of the women I " dated " all wanted to drive... I was surprised at how many could drive a manual and drive it fairly well.....
Most told me their fathers had taught them how to drive a manual as their first driver when learning to drive.. I have always deduced that it was a man preventing their daughters from getting stuck in a ' caulk or walk" situation.....
Read it a while back that a manual transmission is the best theft deterent for a car there is.....
 
Reactions: ThinBlue502

ThinBlue502

5 Year Member
May 7, 2019
408
727
113
Ohio
Sep 14, 2023
#7,084
  • Sep 14, 2023
  • #7,084
Noobz347 said:
Does she have any idea what she's driving or does she think they all rolled off the assembly line that good? LoL
Click to expand...
She is aware of how much work has gone into the car. She was terrified to drive it at first, but she relaxed pretty quickly.
limp said:
At 39 I re entered the dating pool after a divorce...... I had a Merkur XR4Ti 5 speed beater car that alot of the women I " dated " all wanted to drive... I was surprised at how many could drive a manual and drive it fairly well.....
Most told me their fathers had taught them how to drive a manual as their first driver when learning to drive.. I have always deduced that it was a man preventing their daughters from getting stuck in a ' caulk or walk" situation.....
Read it a while back that a manual transmission is the best theft deterent for a car there is.....
Click to expand...
When I was sitting thinking about it, that’s 3 people that will be here long after I’m gone that will be telling someone not even born yet about how I taught them to drive a car with a manual.

Only 2.4% of new cars have a manual. Less and less people know how to drive them and that is just crazy to me. I get why they’re not fun all the time, but there is something so cathartic about rowing the gears on an open road. This car, especially with its lack of hydraulic assistance in the clutch pedal. All three young drivers felt the same way after they got comfortable. So that is a universal truth that spans generations.

Doing the Lord’s work here people.

Lololololol
 
Reactions: gearhead77, TOOLOW91, Noobz347 and 3 others

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,265
17,952
224
Massachusetts
Sep 14, 2023
#7,085
  • Sep 14, 2023
  • #7,085
I have one of those "save the manuals" t-shirts. You wouldn't beleive the amount of random folks come up to me and strike up conversation over it.
 
Reactions: limp, TOOLOW91, 85GTStangGuy and 1 other person

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,445
1,530
194
Maryland
Sep 14, 2023
#7,086
  • Sep 14, 2023
  • #7,086
As some cars are available in both automatic and manual transmissions, sometimes the automatic in those cars was designed poorly and was a POS in its own right. In that case, not only is there a link to fun driving as a decision maker for the manual , but because the other option is just a pile of crap, even on its best day.
 

limp

wrap a little cheese around it and its a done
5 Year Member
Oct 4, 2020
5,472
2,903
173
Florida
Sep 14, 2023
#7,087
  • Sep 14, 2023
  • #7,087
A few years ago I was going to buy a new mustang GT vert.... I don't think I ever saw a manual in any car lot.. I found one online at an Orlando dealer ( I live west of there towards Tampa )_ and I drove over to look at it.... Couldn't find it, got a salesman involved and it turned out to be a customer ordered car that was long gone....
 

qikgts

Active Member
Nov 12, 2001
117
58
38
FLORIDA
Sep 15, 2023
#7,088
  • Sep 15, 2023
  • #7,088
This is my '85.

It's got 4 lug '93 Cobra repops with 245/45/17 Nitto 555's, T-Bird/'93 Cobra rear calipers on NRC brackets, Tokico Blues front and rear along with Tokico springs, new OE style upper control arm bushings in the diff, MM Heavy Duty lowers and a set of take off factory style uppers I've had around for years. In the front I did new factory style A arms, swapped to aero 73mm calipers and slotted rotors, adj prop valve, Ranchero MC, gutted stock prop valve, MM bump steer kit, added MM CC plates and put on a 03 Cobra rack with the MM steering shaft. Also has MM full length subframes and Stifflers jacking rails. Next up is a 13" 4 lug kit with early style PBR Cobra calipers from FoxbodyBrakes.com.

Some other details are that I did "almost full exhaust" by swapping the DS header for a stock 86 and up piece, Dynomax X Pipe and Dynomax 2 1/2" cat back with welded mufflers. I've got some JBA shorty's, a set of FMS X307s w/56 cc chambers, a TF Stage 1 cam, Quick Fuel 650 4150 style carb w/annular boosters and a Weiand 7515 that need to get on there.

Inside I did a Dakota Digital cluster. Everything else is pretty stock for now. I've got SVO style seat foam and TMI covers with the double stitch which should spruce things up a bit more.

Sorry if I went into a little too much detail for this thread. I was on a roll so I just kept going... lol



 
Reactions: Jersey Joe, Potomus Pete, ThinBlue502 and 9 others

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,161
21,335
234
Box behind Walmart
Sep 15, 2023
#7,089
  • Sep 15, 2023
  • #7,089
I think your gauge cluster is the best part. I didn't know they had an aftermarket gauge set out that fit our cars and didn't look like total ass.
 
Reactions: limp

qikgts

Active Member
Nov 12, 2001
117
58
38
FLORIDA
Sep 15, 2023
#7,090
  • Sep 15, 2023
  • #7,090
I like it too. They seem to work well and they they are pretty sharp yet subtle..

If LMR would do for 4-eyed cars what they did for Aero style cars w/Dakota Digital I would have bought that instead. The stock style clusters they did for both Aero style clusters are really nice looking. Even more expensive than this but I think it would be worth it.
 

limp

wrap a little cheese around it and its a done
5 Year Member
Oct 4, 2020
5,472
2,903
173
Florida
Sep 16, 2023
#7,091
  • Sep 16, 2023
  • #7,091
Mustang5L5 said:
I have one of those "save the manuals" t-shirts. You wouldn't beleive the amount of random folks come up to me and strike up conversation over it.
Click to expand...
Did you get that off of Matt Armstrongs site??
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,265
17,952
224
Massachusetts
Sep 16, 2023
#7,092
  • Sep 16, 2023
  • #7,092
limp said:
Did you get that off of Matt Armstrongs site??
Click to expand...

Amazon. Not sure if official or a rip off.
 
Reactions: limp

Gunmonkey

Active Member
Apr 16, 2016
54
28
38
South Florida
Sep 16, 2023
#7,093
  • Sep 16, 2023
  • #7,093
How mine sat before I dropped it off at Blow By Racing earlier this year for a full drivetrain replacement. Had a Trick Flow HCI and Vortech, stock bottom end, stock T5. One of the pistons had bad compression and the trans was whiny. Figured rather than rebuild it as a 302 or stroke it on the stock block, I might as well do something that can make and safely handle more power than the stock block and T5. Should have it back any day now, with a Dart block 347 (HCI and Vortech carried over) and Tremec TKX. BBR is still working out some tuning bugs, but even without being able to use full RPM range and full boost, it already put down over 550 HP. Can’t wait to get it back on the road.
 

Attachments

  • IMG_8043.webp
    1.1 MB · Views: 137
Reactions: qikgts and ThinBlue502

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,161
21,335
234
Box behind Walmart
Sep 16, 2023
#7,094
  • Sep 16, 2023
  • #7,094
qikgts said:
Click to expand...

Are those dimmable?
 

Rdub6

So while I wait to figure out my rear end issues
5 Year Member
Dec 29, 2017
3,956
2,937
153
Long Island, NY
Sep 16, 2023
#7,095
  • Sep 16, 2023
  • #7,095
qikgts said:
This is my '85.

It's got 4 lug '93 Cobra repops with 245/45/17 Nitto 555's, T-Bird/'93 Cobra rear calipers on NRC brackets, Tokico Blues front and rear along with Tokico springs, new OE style upper control arm bushings in the diff, MM Heavy Duty lowers and a set of take off factory style uppers I've had around for years. In the front I did new factory style A arms, swapped to aero 73mm calipers and slotted rotors, adj prop valve, Ranchero MC, gutted stock prop valve, MM bump steer kit, added MM CC plates and put on a 03 Cobra rack with the MM steering shaft. Also has MM full length subframes and Stifflers jacking rails. Next up is a 13" 4 lug kit with early style PBR Cobra calipers from FoxbodyBrakes.com.

Some other details are that I did "almost full exhaust" by swapping the DS header for a stock 86 and up piece, Dynomax X Pipe and Dynomax 2 1/2" cat back with welded mufflers. I've got some JBA shorty's, a set of FMS X307s w/56 cc chambers, a TF Stage 1 cam, Quick Fuel 650 4150 style carb w/annular boosters and a Weiand 7515 that need to get on there.

Inside I did a Dakota Digital cluster. Everything else is pretty stock for now. I've got SVO style seat foam and TMI covers with the double stitch which should spruce things up a bit more.

Sorry if I went into a little too much detail for this thread. I was on a roll so I just kept going... lol



Click to expand...
That’s a beautiful car. Even though my ‘86 looks like ‘87 and up, my dash is ‘86, and I’d love to do that Dakota upgrade. Looks awesome man!!
 

qikgts

Active Member
Nov 12, 2001
117
58
38
FLORIDA
Sep 17, 2023
#7,096
  • Sep 17, 2023
  • #7,096
Noobz347 said:
Are those dimmable?
Click to expand...
Yes. It was optional to buy their dimmer knob.
 
Reactions: Noobz347

qikgts

Active Member
Nov 12, 2001
117
58
38
FLORIDA
Sep 17, 2023
#7,097
  • Sep 17, 2023
  • #7,097
Rdub6 said:
That’s a beautiful car. Even though my ‘86 looks like ‘87 and up, my dash is ‘86, and I’d love to do that Dakota upgrade. Looks awesome man!!
Click to expand...
Thanks for the kind words! I really like the cluster too. There's another company out there that make a pretty nice looking set up too. NVU. I almost went with their set up but I knew the DD name and had some prior experience with DD products. Below is one of NVU setups and a link to their 4 eyed options..



87-93 Fox Mustang custom dash gauges cluster

87-93 Fox Mustang custom dash gauges cluster
newvintageusallc.mybigcommerce.com

The text says 87-93 but the link goes to four eyed stuff.

I can't wait to do the next round of mods. I also want to add a '84 style hood scoop. At some point it will need paint too and I hope I can spend enough to do it right.
 

gearhead77

Active Member
Mar 13, 2019
128
56
38
Pittsburgh PA
Sep 17, 2023
#7,098
  • Sep 17, 2023
  • #7,098
Bought the car 4 years ago from the original owner. 72k. This is after the 3rd time buffing it out. Man, that cladding on the GT really holds the dirt. That’s why I wanted an LX! Coming along, likely won’t ever be perfect, but it’s a good driver. Just did new clutch, main seal, flywheel and BBK X pipe and Varitune exhaust.
 
Reactions: JD1964, qikgts and limp

limp

wrap a little cheese around it and its a done
5 Year Member
Oct 4, 2020
5,472
2,903
173
Florida
Sep 17, 2023
#7,099
  • Sep 17, 2023
  • #7,099
qikgts said:
Thanks for the kind words! I really like the cluster too. There's another company out there that make a pretty nice looking set up too. NVU. I almost went with their set up but I knew the DD name and had some prior experience with DD products. Below is one of NVU setups and a link to their 4 eyed options..



87-93 Fox Mustang custom dash gauges cluster

87-93 Fox Mustang custom dash gauges cluster
newvintageusallc.mybigcommerce.com

The text says 87-93 but the link goes to four eyed stuff.

I can't wait to do the next round of mods. I also want to add a '84 style hood scoop. At some point it will need paint too and I hope I can spend enough to do it right.
Click to expand...
What do you cover the R&L vents and the heater controls when using this dash?
 

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,491
8,734
234
S.I.NY
Sep 17, 2023
#7,100
  • Sep 17, 2023
  • #7,100
All ford Cars and coffee today with a few buddies . The 2 saleens I didn’t know but had to post
 
Reactions: Noobz347, qikgts and General karthief
Prev
  • 1
  • …
  • 353
  • 354
  • 355
  • 356
  • 357
  • …
  • 378
Next
First Prev 355 of 378 Next Last
You must log in or register to reply here.

Similar threads

S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Lost my Foxbody
  • Mhalc1
  • Feb 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
767
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 17, 2026
Mhalc1
Progress Thread 85GT4V’s “New” 1985 Mustang GT
  • 85GT4V
  • May 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 5 6 7
Replies
138
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 26, 2026
85GT4V
F
Drivetrain TKX Shifter Position Question
  • fasterthangas
  • May 29, 2026
  • 1994 - 1995 Specific Tech
  • 2 3
Replies
41
Views
789
1994 - 1995 Specific Tech Jul 4, 2026
WhiteCobra95
C
Help identifying 8.8
  • Caden_H
  • Jun 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
678
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 12, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?