• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

post you RWHP/RWTQ

  • Thread starter Thread starter red94fiveo
  • Start date Start date Oct 7, 2003
  • 1
  • 2
  • 3
  • 4
Next
1 of 4 Next Last

red94fiveo

New Member
Apr 12, 2003
1,269
0
0
Wichita, KS
Oct 7, 2003
#1
  • Oct 7, 2003
  • #1
Like it says in the subject please also post your complete combo (if it isn't in sig already). I am curious what everyone's combo is putting down to the wheels. I am espescially interested in what you N/A guys are getting out of your combo's.

Oh yeah, sorry but I have no numbers to start with.
 

moneypit94

Active Member
May 23, 2003
1,723
2
39
Macomb, IL
Oct 7, 2003
#2
  • Oct 7, 2003
  • #2
342/359
chip, pulleys, msd, LT's, O/R h, cat-back flows,
stroked to a 331 with nice heavy forged internals.
TFS ported track heat heads, Systemax intake, FTI Cam.
Oh and i just put on a shift light (10 extra hp at least)

For all my mods im lacking probably 30 horse. But im about to make up for it with an s-trim.
 

GroverDill

GoldMember
Founding Member
Aug 18, 1999
5,442
1,490
214
Demotte IN 46310
Oct 7, 2003
#3
  • Oct 7, 2003
  • #3
Just got tuned/chiped by Fordchip yesterday

I know its not a 94-95 car but the combo is nothing out of the ordinary
 

moneypit94

Active Member
May 23, 2003
1,723
2
39
Macomb, IL
Oct 7, 2003
#4
  • Oct 7, 2003
  • #4
I know its not a 94-95 car but the combo is nothing out of the ordinary
Click to expand...

Combo is nothing out of the ordinary except for probably your cam. With a 94/95 we are limited on how aggressive of a cam we can get. Thats probably why you won't see those kind of numbers on most NA 94/95 302's. Awsome numbers though...
 

GroverDill

GoldMember
Founding Member
Aug 18, 1999
5,442
1,490
214
Demotte IN 46310
Oct 7, 2003
#5
  • Oct 7, 2003
  • #5
the cam isnt big at all,


the car baselined 313 as I drove it in. left with 20 more rwhp
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
Oct 7, 2003
#6
  • Oct 7, 2003
  • #6
I have 294/327SAE to the wheels with the combo in my sig. With the shortbelt I run I suspect I'm just at or over 300RWHP. If money and time allow, I'd like to get it dyno'd again with the shortbelt before I rebuild the bottom end.

Nice numbers Grover, are those SAE? One question though, I recently saw a guy on the modular board post his numbers from the JBA dyno and he got TORE UP because they were so overinflated. What type of dyno is it as I've never seen a print out like that. I'm not saying yours are inflated, but there was a good number of guys that dyno'd there a few weeks ago and their numbers were way high. the guy I mentioned said the dyno showed something like 275 to the wheels with just exhaust and pulleys I think, which was about 30RWHP too high. Do you have any 1/4 times with that combo? Again, nice numbers.
 

GroverDill

GoldMember
Founding Member
Aug 18, 1999
5,442
1,490
214
Demotte IN 46310
Oct 7, 2003
#7
  • Oct 7, 2003
  • #7
I remeber that guy, fwiw he had his car redynoed and got similar numbers. withing 5 hp and tq.

I know I was shocked with the numbers as well, I dont have any track times, and to be honest I know they will suck as im not a very good driver .

The dyno used was a dyno dynamics, and others were getting tuned the same day, with numbers as expected.

I will also be going to hit up a dyno jet this weekend, 40 bucks 2 pulls just to see what it does.

yes the numbers are sae corrected.

/me shrugs
 

Pops Fun

10 Year Member
Feb 15, 2003
961
14
59
Cincinnati, Ohio
Oct 7, 2003
#8
  • Oct 7, 2003
  • #8
Hi,
Lowered (Eibach 52/94), Cold Air Kit, Under Drive Pullies, Ford 3.73 Gear,
Steeda Tri-Ax, Flowmaster Exhaust,Tokico Shocks & Struts, Mac Shorty Header

Above combo SAE # 210 RWHP 277 RWTK

Then Added:
New: TFS TW Heads, Steeda 19 Cam, Cobra Intake, FMS 65mm T/B,
Pro-M 75MM MAF, Steeda 24# injectors, H&S 1.72 Roller Rockers, MSD 6al,
Blaster coil, Walbro 255 LPH, Timing chain and Gear

SAE # 281 RWHP 300 RWTK

Hoping to have a chip burnt Thursday. Will try and get more out of it then !!

Steve
 

GTJake

Founding Member
Oct 28, 2002
3,049
0
56
Ann Arbor, MI
Oct 7, 2003
#9
  • Oct 7, 2003
  • #9
Pops Fun- Get rid of those stock headers and mid pipe. Put on some long tubes and a cat-less mid-pipe and watch those numbers rise.

Jake
 

Rootus

Officially Addicted
Feb 8, 2003
6,659
1
0
Portland, Oregon
Oct 7, 2003
#10
  • Oct 7, 2003
  • #10
309 rwhp, 325 rwtq SAE.

When dyno'd, the combo was: AFR 165 heads, FTI cam, Edelbrock Performer intake, FMS 65mm throttle body, Pro-M 75mm MAF, Hedman shorty headers, Magnaflow catted H-pipe, MAC cat-back, underdrive pullies.

Dave
 
S

shadystang1

Founding Member
Jun 12, 2002
134
0
0
Oct 7, 2003
#11
  • Oct 7, 2003
  • #11
KillerCanary...........What tires were you on when you ran the time in your sug? Launch rpm?
 
J

jjd975

Founding Member
Jul 17, 2000
4,236
0
0
louisville,kentucky
Oct 7, 2003
#12
  • Oct 7, 2003
  • #12
N/A: 292/315
Dry 100 shot: 376/462
Wet 150 shot: Not sure. More than the dry 100 though!

Best 1/8 is a 8.14 @ 87.5 N/A
Best on the 150 is a 7.6 @ 92 (tune has to be off)

Stock block
73mm C&L (24s)
65mm TB
TFS street heat (ported lower)
Edelbrock 6037s (ported)
BBK LTs
Crane 2031 cam and 1.7 rockers
3.90 gears and T-5 tranny
 
G

Green 94 5.0

Founding Member
Mar 25, 2002
2,601
12
79
Ft. Lauderdale, FL
Oct 7, 2003
#13
  • Oct 7, 2003
  • #13


first and third pulls were on the motor alone. the second was with a 75 shot of nitrous. the a/f was terrible and the car was completely untuned. mods at the time were:

gt40 intake (ported lower), bbk 70mm t/b, mac cai, bbk ceramic shorty headers, bbk o/r h-pipe, flowmaster american thunder exhaust, asp pulleys, fidanza flywheel, aluminum driveshaft, stock 3.27s, 10* timing.

ill be back on the dyno soon. since then the car has gotten:

tfs twisted wedge heads (heavily worked), tfs stage 1 cam, scorpion 1.6 rockers, 24# injectors, pro-m 80mm maf, and a tweecer r/t, the nitrous is going to be rejetted for 125hp. anyone want to estimate what you think my numbers will be? im hoping to be near the 300 mark before the nitrous. anyone think its possible?
 

WhiteDevil

New Member
Feb 4, 2003
2,717
0
0
San Diego
Oct 7, 2003
#14
  • Oct 7, 2003
  • #14
All my mods and times are in the sig best ever dyno was

245rwhp @5120rpm
293rwtq @3970rpm
 

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Oct 7, 2003
#15
  • Oct 7, 2003
  • #15
247/290

full boltons, stock heads
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
Oct 7, 2003
#16
  • Oct 7, 2003
  • #16
shadystang1 said:
KillerCanary...........What tires were you on when you ran the time in your sug? Launch rpm?
Click to expand...

:OT:
26X10.5X16 ET streets that are 4 years old and had 17lbs of air in them. I left at 4500. The time was also run with a shortbelt and no pass seat, my raceweight was 3670lbs. I ran 12.70 at 107mph with the stock belt, pass seat installed, and on nitto DR's with a 1.75 60' with a 3000rpm launch.
 

FastmanGT

Founding Member
May 22, 2002
587
0
0
Oklahoma City, Oklahoma
Oct 7, 2003
#17
  • Oct 7, 2003
  • #17
HP: 210.9 TQ: 262.8 ( not corrected )
Thats with all mods in sig, except maf and tb. The auto was one its way out at the time.
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Oct 7, 2003
#18
  • Oct 7, 2003
  • #18
Best was 389/392 right after the the Vortech was put in
ALL mods in my sig.

However, right now, it's tuned DOWN to about 350/360, waiting for a 4:1 FMU to get put in.

RC
 

Jaden

Founding Member
May 7, 2000
99
0
16
Gainesville, FL
Oct 7, 2003
#19
  • Oct 7, 2003
  • #19
See signature
 

Nihilation

Founding Member
Aug 27, 2001
1,170
0
37
Manassas, VA
Oct 8, 2003
#20
  • Oct 8, 2003
  • #20
Stock TB-
294/311 SAE
301/318 STD
 
  • 1
  • 2
  • 3
  • 4
Next
1 of 4 Next Last
You must log in or register to reply here.

Similar threads

W
FoxBody Gauge Cluster - What would you pay?
  • wildstang17
  • Jun 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
268
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 26, 2025
Mustang5L5
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
Engine Information that is Needed When You Post a "Car is not Running" or "Car is Running Poorly" Thread
  • AeroCoupe
  • Apr 28, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
29
Views
1K
Fox 5.0 Mustang Tech May 4, 2025
Bullitt347
S
65 Coupe I6 Auto to 302 EFI 5 Speed Swap
  • Scuderia
  • Feb 3, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
14
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Sep 9, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?