power brake conversion kits, please help!!!

[my70stang]

My parents want me to have power brakes when i start driving.

right now I have the straight 6 200ci right now with a 3 speed manual, later Im going to swap that out to a 89-93 5.0 with a 5 speed. I have cragar s/s 15 x 8" with a 5-bolt pattern rims sitting in my garage ready to put on. My car has all of the stock 6-cylinder parts on it and im not sure what needs to be done.

If anyone has any information, i would love to hear it. and if you could, please check the link to see if i have the right order.

http://www.mpbrakes.com/products/product-detail.cfm?product_id=296

if i got this set, would it work for me?

 

[68torinogt]

you can get it off a granada if you dont have cash for new stuff but if you want the good stuff to start go with ssbc

 

[my70stang]

ok, well my dads paying for it if i can sell his truck, so im gettin a good deal

 

[Rusty67]

*Points to the search button*

 

[Steve69]

I did the granada disc brakes swap with my 69 and they work great. I
did a 5.0 booster and modified the firewall to make it fit. Its pretty easy
to do. You have to make the hole a little bigger and drill out the 5.0
booster holes. I took the rod and turned it upside down and it connected
to the pin on the brake pedal. The power brake booster cost me $20.00
bucks on Ebay. I used a Ford Granada Master cylinder that bolts right
up to the 5.0 booster. Send my email if you want more info on it

[email protected]

 

[68torinogt]

i have manual granada on the torino and i like it short of it being power