Power pipe+lightning maf

[Dagz]

Just like the title says. What have you guys done here as far as connecting it to the power pipe and a filter. Could someone show me some pictures if they have any.

Thanks again

 

[Dagz]

BUMP, really need to some info here. All most done my car. just painting under the hood. Everything else is complete. Please help

Thanks

 

[Hef5.0weisen]

I'm in the same boat....for the filter you can find an adapter, all over ebay.

For the tubing from the MAF to the throttle body, I'm thinking about the power pipe UPR sells, says its 4 inch, roughly the same as the lightning, use a silicone coupling. Other alternative is heading to a truck stop and picking up some 4in exhaust pipe,have a few beers, then cut and weld, hope it works in the morning. I'm sure you've heard this as well, but the ol Lowe's or Home Depot cold air kit (or whatever home improvement type store you guys got up north), pick up some PVC pipe, a few bends and some couplings.

make your own, do it tastefully, have fun and be creative

good luck

 

[earleys94gt]

A few guys on here have made their own out of PVC, I think.

IIRC you need about 15 in. of PVC, and some couplers from Lowe's/ Home Depot.

If you do a search you can probably find some pics.